Release v0.3.3

Cache AUR package providers #23

README.md

@@ -80,6 +80,8 @@ Then import your module in your main source file.
 import decman
 from syncthing import Syncthing
 
+# NOTE! Removing a enabled module from decman.module means that on_disable will not run.
+# Instead disable the module.
 decman.modules += [Syncthing()]
 ```
 
@@ -148,7 +150,7 @@ decman.user_packages.append(
         pkgname="decman-git",
         # Note, this example may not be up to date
         provides=["decman"],
-        version="0.3.1",
+        version="0.3.3",
         dependencies=["python", "python-requests", "devtools", "pacman", "systemd", "git"],
         make_dependencies=[
             "python-setuptools", "python-build", "python-installer", "python-wheel"
@@ -157,14 +159,14 @@ decman.user_packages.append(
     ))
 ```
 
-Building of foreign packages happens in a chroot. This creates some overhead, but ensures clean builds. By default the chroot is created to `/tmp/decman/build`. I recommend to use a tempfs for the `/tmp/` directory to speed up builds. Also make sure that the tempfs-partition is large enough. I recommend at least 6 GB.
+Building of foreign packages happens in a chroot. This creates some overhead, but ensures clean builds. By default the chroot is created to `/tmp/decman/build`. I recommend to use a tmpfs for the `/tmp/` directory to speed up builds. Also make sure that the tmpfs-partition is large enough. I recommend at least 6 GB.
 
 Build packages are stored in a cache `/var/cache/decman`. By default decman keeps 3 most recent versions of all packages.
 
 ### Systemd units
 
 > [!NOTE]
-> Decman will only enable and disable systemd systemd. It will not start or stop them.
+> Decman will only enable and disable systemd services. It will not start or stop them.
 
 Decman can enable systemd services, system wide or for a specific user. Decman will enable all units defined in the source, and disable them when they are removed from the source. If a unit is not defined in the source, decman will not touch it.
 
@@ -279,7 +281,7 @@ user_packages = [{
     pkgname="decman-git",
     # Note, this example may not be up to date
     provides=["decman"],
-    version="0.3.1",
+    version="0.3.3",
     dependencies=["python", "python-requests", "devtools", "pacman", "systemd", "git"],
     make_dependencies=[
         "python-setuptools", "python-build", "python-installer", "python-wheel"

example/my_module.py

@@ -82,7 +82,7 @@ class MyModule(Module):
         return [
             UserPackage(
                 pkgname="decman-git",
-                version="0.3.1",
+                version="0.3.3",
                 provides=["decman"],
                 dependencies=[
                     "python",

example/source.py

@@ -40,7 +40,7 @@ decman.config.makepkg_user = "kk"
 decman.user_packages.append(
     UserPackage(
         pkgname="decman-git",
-        version="0.3.1",
+        version="0.3.3",
         provides=["decman"],
         dependencies=[
             "python",
@@ -58,7 +58,8 @@ decman.user_packages.append(
             "python-wheel",
         ],
         git_url="https://github.com/kiviktnm/decman-pkgbuild.git",
-    ))
+    )
+)
 
 # Managing only packages with decman is not that interesting.
 # Decman also has really powerful ways of managing config files, scripts etc.
@@ -68,23 +69,25 @@ decman.user_packages.append(
 
 # Define file content inline.
 # Default text file encoding is utf-8 but it can be changed.
-decman.files["/etc/vconsole.conf"] = File(content="KEYMAP=us",
-                                          encoding="utf-8")
+decman.files["/etc/vconsole.conf"] = File(content="KEYMAP=us", encoding="utf-8")
 
 # Include file content from another file, set the file owner and permissions.
 # The source_file is relative to the directory where the main decman source.py is located.
 # By default, the file group is set to the group of the owner, but it can be overridden with the group argument.
 decman.files["/home/kk/.bin/user-script.sh"] = File(
-    source_file="files/user-script.sh", owner="kk", permissions=0o744)
+    source_file="files/user-script.sh", owner="kk", permissions=0o744
+)
 
 # Non-text files such as images can also be managed.
 decman.files["/home/kk/.background.png"] = File(
-    source_file="files/i-dont-actually-exist.png", bin_file=True, owner="kk")
+    source_file="files/i-dont-actually-exist.png", bin_file=True, owner="kk"
+)
 
 # If you need to install multiple files at once, use directories.
 # All files from the source directory will be copied recursively to the target.
 decman.directories["/home/kk/.config/app/"] = Directory(
-    source_directory="files/app-config", owner="kk")
+    source_directory="files/app-config", owner="kk"
+)
 
 # Decman has built in support for managing systemd units as well.
 # Decman will enable services declared here, and disable services removed from here.
@@ -95,8 +98,9 @@ decman.enabled_systemd_units += ["NetworkManager.service"]
 # You can manage units for users as well.
 
 # Ensure that previous user unit declarations aren't overwritten and they are initialized.
-decman.enabled_systemd_user_units[
-    "kk"] = decman.enabled_systemd_user_units.get("kk", [])
+decman.enabled_systemd_user_units["kk"] = decman.enabled_systemd_user_units.get(
+    "kk", []
+)
 # Add user unit.
 decman.enabled_systemd_user_units["kk"].append("syncthing.service")
 
@@ -141,9 +145,9 @@ decman.config.pacman_output_keywords = [
     "pacsave",
     "pacnew",
     # Additional keywords can be:
-    #"warning",
-    #"error",
-    #"note",
+    # "warning",
+    # "error",
+    # "note",
     # They might cause too many highlights however.
 ]
 # If you don't want to print lines that contain keywords, set this to False
@@ -173,7 +177,6 @@ decman.config.number_of_packages_stored_in_cache = 3
 # Create a child class of the decman.config.Commands class and override methods.
 # These are the defaults.
 class MyCommands(decman.config.Commands):
-
     def list_pkgs(self) -> list[str]:
         return ["pacman", "-Qeq", "--color=never"]
 
@@ -193,8 +196,7 @@ class MyCommands(decman.config.Commands):
         return ["pacman", "-D", "--asexplicit"] + pkgs
 
     def install_deps(self, deps: list[str]) -> list[str]:
-        return ["pacman", "-S", "--color=always", "--needed", "--asdeps"
-                ] + deps
+        return ["pacman", "-S", "--color=always", "--needed", "--asdeps"] + deps
 
     def is_installable(self, pkg: str) -> list[str]:
         return ["pacman", "-Sddp", pkg]
@@ -217,8 +219,7 @@ class MyCommands(decman.config.Commands):
     def disable_user_units(self, units: list[str], user: str) -> list[str]:
         return ["systemctl", "--user", "-M", f"{user}@", "disable"] + units
 
-    def compare_versions(self, installed_version: str,
-                         new_version: str) -> list[str]:
+    def compare_versions(self, installed_version: str, new_version: str) -> list[str]:
         return ["vercmp", installed_version, new_version]
 
     def git_clone(self, repo: str, dest: str) -> list[str]:
@@ -241,20 +242,32 @@ class MyCommands(decman.config.Commands):
 
     def install_chroot_packages(self, chroot_dir: str, packages: list[str]):
         return [
-            "arch-nspawn", chroot_dir, "pacman", "-S", "--needed",
-            "--noconfirm"
+            "arch-nspawn",
+            chroot_dir,
+            "pacman",
+            "-S",
+            "--needed",
+            "--noconfirm",
         ] + packages
 
-    def remove_chroot_packages(self, chroot_dir: str, packages: list[str]):
-        return ["arch-nspawn", chroot_dir, "pacman", "-Rsu", "--noconfirm"
-                ] + packages
-
-    def make_chroot_pkg(self, chroot_wd_dir: str, user: str,
-                        pkgfiles_to_install: list[str]) -> list[str]:
-        makechrootpkg_cmd = [
-            "makechrootpkg", "-c", "-r", chroot_wd_dir, "-U", user
+    def resolve_real_name(self, chroot_dir: str, pkg: str) -> list[str]:
+        return [
+            "arch-nspawn",
+            chroot_dir,
+            "pacman",
+            "-Sddp",
+            "--print-format=%n",
+            pkg,
         ]
 
+    def remove_chroot_packages(self, chroot_dir: str, packages: list[str]):
+        return ["arch-nspawn", chroot_dir, "pacman", "-Rsu", "--noconfirm"] + packages
+
+    def make_chroot_pkg(
+        self, chroot_wd_dir: str, user: str, pkgfiles_to_install: list[str]
+    ) -> list[str]:
+        makechrootpkg_cmd = ["makechrootpkg", "-c", "-r", chroot_wd_dir, "-U", user]
+
         for pkgfile in pkgfiles_to_install:
             makechrootpkg_cmd += ["-I", pkgfile]
 
@@ -270,7 +283,6 @@ decman.config.commands = MyCommands()
 
 
 class PikaurWrapperCommands(decman.config.Commands):
-
     def list_pkgs(self) -> list[str]:
         return ["pikaur", "-Qeq"]
 

pyproject.toml

@@ -4,15 +4,21 @@ build-backend = "setuptools.build_meta"
 
 [project]
 name = "decman"
-version = "0.3.1"
+version = "0.3.3"
 description = "Declarative package & configuration manager for Arch Linux."
 license = {file = "LICENSE"}
 authors = [
     {name = "Kivi Kaitaniemi"}
 ]
 dependencies = [
-    "requests"
+    "requests",
 ]
 
 [project.scripts]
 decman = "decman.app:main"
+
+[dependency-groups]
+dev = [
+    "isort>=5.13.2",
+    "ruff>=0.9.3",
+]

src/decman/__init__.py

@@ -2,12 +2,13 @@
 Module for writing system configurations for decman.
 """
 
-import typing
-import pwd
 import grp
-import shutil
 import os
+import pwd
+import shutil
 import subprocess
+import typing
+
 import decman.error
 
 
@@ -20,9 +21,11 @@ class UserRaisedError(Exception):
         super().__init__(message)
 
 
-def sh(sh_cmd: str,
-       user: typing.Optional[str] = None,
-       env_overrides: typing.Optional[dict[str, str]] = None):
+def sh(
+    sh_cmd: str,
+    user: typing.Optional[str] = None,
+    env_overrides: typing.Optional[dict[str, str]] = None,
+):
     """
     Shortcut for running a shell command.
     """
@@ -49,16 +52,20 @@ def sh(sh_cmd: str,
                 f"Running user defined shell command failed because the user {user} doesn't exist."
             ) from e
 
-        with subprocess.Popen(sh_cmd, shell=True, group=gid, user=uid,
-                              env=env) as process:
+        with subprocess.Popen(
+            sh_cmd, shell=True, group=gid, user=uid, env=env
+        ) as process:
             if process.wait() != 0:
                 raise decman.error.UserFacingError(
-                    f"Running user shell command '{sh_cmd}' as {user} failed.")
+                    f"Running user shell command '{sh_cmd}' as {user} failed."
+                )
 
 
-def prg(command: list[str],
-        user: typing.Optional[str] = None,
-        env_overrides: typing.Optional[dict[str, str]] = None):
+def prg(
+    command: list[str],
+    user: typing.Optional[str] = None,
+    env_overrides: typing.Optional[dict[str, str]] = None,
+):
     """
     Shortcut for running a program.
     """
@@ -74,7 +81,8 @@ def prg(command: list[str],
             subprocess.run(command, check=True, env=env)
         except subprocess.CalledProcessError as e:
             raise decman.error.UserFacingError(
-                f"Running user defined program '{command}' failed.") from e
+                f"Running user defined program '{command}' failed."
+            ) from e
     else:
         try:
             uid = pwd.getpwnam(user).pw_uid
@@ -84,11 +92,11 @@ def prg(command: list[str],
                 f"Running user defined program failed because the user {user} doesn't exist."
             ) from e
 
-        with subprocess.Popen(command, group=gid, user=uid,
-                              env=env) as process:
+        with subprocess.Popen(command, group=gid, user=uid, env=env) as process:
             if process.wait() != 0:
                 raise decman.error.UserFacingError(
-                    f"Running user program '{command}' as {user} failed.")
+                    f"Running user program '{command}' as {user} failed."
+                )
 
 
 class File:
@@ -127,9 +135,7 @@ class File:
         if group is not None:
             self.gid = grp.getgrnam(group).gr_gid
 
-    def copy_to(self,
-                target: str,
-                variables: typing.Optional[dict[str, str]] = None):
+    def copy_to(self, target: str, variables: typing.Optional[dict[str, str]] = None):
         """
         Copies the contents of this file to the target file.
         """
@@ -138,8 +144,9 @@ class File:
 
         target_directory = os.path.dirname(target)
 
-        def create_missing_dirs(dirct: str, uid: typing.Optional[int],
-                                gid: typing.Optional[int]):
+        def create_missing_dirs(
+            dirct: str, uid: typing.Optional[int], gid: typing.Optional[int]
+        ):
             if not os.path.isdir(dirct):
                 parent_dir = os.path.dirname(dirct)
                 if not os.path.isdir(parent_dir):
@@ -161,8 +168,7 @@ class File:
         os.chmod(target, self.permissions)
 
     def _write_content(self, target: str, variables: dict[str, str]):
-        if self.source_file is not None and (self.bin_file
-                                             or len(variables) == 0):
+        if self.source_file is not None and (self.bin_file or len(variables) == 0):
             shutil.copy(self.source_file, target)
         elif self.bin_file and self.content is not None:
             with open(target, "wb") as file:
@@ -177,7 +183,9 @@ class File:
             with open(target, "wt", encoding=self.encoding) as file:
                 file.write(content)
         else:
-            assert self.content is not None, "Content should be set since source_file was not set."
+            assert self.content is not None, (
+                "Content should be set since source_file was not set."
+            )
             content = self.content
             for var, value in variables.items():
                 content = content.replace(var, value)
@@ -217,10 +225,12 @@ class Directory:
         if group is not None:
             self.gid = grp.getgrnam(group).gr_gid
 
-    def copy_to(self,
-                target_directory: str,
-                variables: typing.Optional[dict[str, str]] = None,
-                only_print: bool = False) -> list[str]:
+    def copy_to(
+        self,
+        target_directory: str,
+        variables: typing.Optional[dict[str, str]] = None,
+        only_print: bool = False,
+    ) -> list[str]:
         """
         Copies the files in this directory to the target directory.
 
@@ -233,14 +243,15 @@ class Directory:
             for src_dir, _, src_files in os.walk("."):
                 for src_file in src_files:
                     src_path = os.path.join(src_dir, src_file)
-                    file = File(source_file=src_path,
-                                bin_file=self.bin_files,
-                                encoding=self.encoding,
-                                owner=self.owner,
-                                group=self.group,
-                                permissions=self.permissions)
-                    target = os.path.normpath(
-                        os.path.join(target_directory, src_path))
+                    file = File(
+                        source_file=src_path,
+                        bin_file=self.bin_files,
+                        encoding=self.encoding,
+                        owner=self.owner,
+                        group=self.group,
+                        permissions=self.permissions,
+                    )
+                    target = os.path.normpath(os.path.join(target_directory, src_path))
                     created.append(target)
 
                     if not only_print:

src/decman/app.py

@@ -8,9 +8,9 @@ import sys
 import traceback
 
 import decman
+import decman.config as conf
 import decman.error as err
 import decman.lib as l
-import decman.config as conf
 from decman.lib import fpm
 
 
@@ -23,53 +23,62 @@ def main():
 
     parser = argparse.ArgumentParser(
         prog="decman",
-        description=
-        "Declarative package & configuration manager for Arch Linux",
-        epilog="See more help at: https://github.com/kiviktnm/decman")
+        description="Declarative package & configuration manager for Arch Linux",
+        epilog="See more help at: https://github.com/kiviktnm/decman",
+    )
 
-    parser.add_argument("--source",
-                        action="store",
-                        help="python file containing configuration")
+    parser.add_argument(
+        "--source", action="store", help="python file containing configuration"
+    )
     parser.add_argument(
         "--print",
         "--dry-run",
         action="store_true",
         default=False,
-        help="print what would happen as a result of running decman")
-    parser.add_argument("--debug",
-                        action="store_true",
-                        default=False,
-                        help="show debug output")
+        help="print what would happen as a result of running decman",
+    )
+    parser.add_argument(
+        "--debug", action="store_true", default=False, help="show debug output"
+    )
     parser.add_argument(
         "--no-packages",
         action="store_true",
         default=False,
-        help="don't upgrade any packages (including foreign packages)")
-    parser.add_argument("--no-foreign-packages",
-                        action="store_true",
-                        default=False,
-                        help="don't upgrade foreign packages")
-    parser.add_argument("--no-files",
-                        action="store_true",
-                        default=False,
-                        help="don't install any files")
-    parser.add_argument("--no-systemd-units",
-                        action="store_true",
-                        default=False,
-                        help="don't enable/disable systemd units")
-    parser.add_argument("--no-commands",
-                        action="store_true",
-                        default=False,
-                        help="don't run user specified commands")
-    parser.add_argument("--upgrade-devel",
-                        action="store_true",
-                        default=False,
-                        help="upgrade devel packages")
+        help="don't upgrade any packages (including foreign packages)",
+    )
+    parser.add_argument(
+        "--no-foreign-packages",
+        action="store_true",
+        default=False,
+        help="don't upgrade foreign packages",
+    )
+    parser.add_argument(
+        "--no-files", action="store_true", default=False, help="don't install any files"
+    )
+    parser.add_argument(
+        "--no-systemd-units",
+        action="store_true",
+        default=False,
+        help="don't enable/disable systemd units",
+    )
+    parser.add_argument(
+        "--no-commands",
+        action="store_true",
+        default=False,
+        help="don't run user specified commands",
+    )
+    parser.add_argument(
+        "--upgrade-devel",
+        action="store_true",
+        default=False,
+        help="upgrade devel packages",
+    )
     parser.add_argument(
         "--force-build",
         action="store_true",
         default=False,
-        help="force building of packages that are already cached")
+        help="force building of packages that are already cached",
+    )
 
     args = parser.parse_args()
 
@@ -105,8 +114,7 @@ def main():
             l.print_debug(line)
         errored = True
     except decman.UserRaisedError as user_error:
-        l.print_error(
-            f"Error encountered while running the source: {user_error}")
+        l.print_error(f"Error encountered while running the source: {user_error}")
         errored = True
 
     # Save even when an error has occurred, since this avoids repeating steps like building pkgs.
@@ -158,13 +166,23 @@ def _set_up(store: l.Store, args):
             content = file.read()
     except OSError as e:
         raise err.UserFacingError(
-            f"Failed to read source file '{store.source_file}'.") from e
+            f"Failed to read source file '{store.source_file}'."
+        ) from e
 
     os.chdir(source_dir)
     sys.path.append(".")
     exec(content)
 
-    return args.print, not args.no_packages, not args.no_foreign_packages, not args.no_files, not args.no_systemd_units, not args.no_commands, args.upgrade_devel, args.force_build
+    return (
+        args.print,
+        not args.no_packages,
+        not args.no_foreign_packages,
+        not args.no_files,
+        not args.no_systemd_units,
+        not args.no_commands,
+        args.upgrade_devel,
+        args.force_build,
+    )
 
 
 class Core:
@@ -173,7 +191,16 @@ class Core:
     """
 
     def __init__(self, store: l.Store, opts):
-        self.only_print, self.update_packages, self.update_foreign_packages, self.update_files, self.update_units, self.run_commands, self.upgrade_devel, self.force_build = opts
+        (
+            self.only_print,
+            self.update_packages,
+            self.update_foreign_packages,
+            self.update_files,
+            self.update_units,
+            self.run_commands,
+            self.upgrade_devel,
+            self.force_build,
+        ) = opts
 
         self.store = store
         self.source = _resolve_source()
@@ -183,10 +210,10 @@ class Core:
 
         for upkg in self.source.all_user_pkgs():
             self.fpkg_search.add_user_pkg(
-                fpm.PackageInfo.from_user_package(upkg, self.pacman))
+                fpm.PackageInfo.from_user_package(upkg, self.pacman)
+            )
 
-        self.fpm = fpm.ForeignPackageManager(store, self.pacman,
-                                             self.fpkg_search)
+        self.fpm = fpm.ForeignPackageManager(store, self.pacman, self.fpkg_search)
 
     def run(self):
         """
@@ -219,8 +246,7 @@ class Core:
         to_disable = self.source.units_to_disable(self.store)
         l.print_list("Disabling systemd units:", to_disable)
         if to_disable:
-            l.print_info(
-                "Disabled systemd units won't be stopped automatically.")
+            l.print_info("Disabled systemd units won't be stopped automatically.")
         if not self.only_print:
             self.systemctl.disable_units(to_disable)
 
@@ -242,15 +268,14 @@ class Core:
         if not self.only_print:
             self.pacman.upgrade()
             if conf.enable_fpm and self.update_foreign_packages:
-                self.fpm.upgrade(self.upgrade_devel, self.force_build,
-                                 self.source.ignored_packages)
+                self.fpm.upgrade(
+                    self.upgrade_devel, self.force_build, self.source.ignored_packages
+                )
 
     def _install_pkgs(self):
         currently_installed = self.pacman.get_installed()
-        to_install_pacman = self.source.pacman_packages_to_install(
-            currently_installed)
-        to_install_fpm = self.source.foreign_packages_to_install(
-            currently_installed)
+        to_install_pacman = self.source.pacman_packages_to_install(currently_installed)
+        to_install_fpm = self.source.foreign_packages_to_install(currently_installed)
 
         l.print_list("Installing pacman packages:", to_install_pacman)
 
@@ -269,9 +294,7 @@ class Core:
         all_created = self.source.create_all_files(self.only_print)
         to_remove = self.source.files_to_remove(self.store, all_created)
 
-        l.print_list("Ensured files are up to date:",
-                     all_created,
-                     elements_per_line=1)
+        l.print_list("Ensured files are up to date:", all_created, elements_per_line=1)
         l.print_list("Removing files:", to_remove, elements_per_line=1)
 
         if self.only_print:
@@ -290,8 +313,7 @@ class Core:
         to_enable = self.source.units_to_enable(self.store)
         l.print_list("Enabling systemd units:", to_enable)
         if to_enable:
-            l.print_info(
-                "Enabled systemd units won't be started automatically.")
+            l.print_info("Enabled systemd units won't be started automatically.")
         if not self.only_print:
             self.systemctl.enable_units(to_enable)
 

src/decman/config.py

@@ -64,8 +64,7 @@ class Commands:
         Running this command installs the given packages from pacman repositories.
         The packages are installed as dependencies.
         """
-        return ["pacman", "-S", "--color=always", "--needed", "--asdeps"
-                ] + deps
+        return ["pacman", "-S", "--color=always", "--needed", "--asdeps"] + deps
 
     def is_installable(self, pkg: str) -> list[str]:
         """
@@ -110,8 +109,7 @@ class Commands:
         """
         return ["systemctl", "--user", "-M", f"{user}@", "disable"] + units
 
-    def compare_versions(self, installed_version: str,
-                         new_version: str) -> list[str]:
+    def compare_versions(self, installed_version: str, new_version: str) -> list[str]:
         """
         Running this command outputs -1 when the installed version is older than the new version.
         """
@@ -160,27 +158,42 @@ class Commands:
         Running this command installs the given packages to the given chroot.
         """
         return [
-            "arch-nspawn", chroot_dir, "pacman", "-S", "--needed",
-            "--noconfirm"
+            "arch-nspawn",
+            chroot_dir,
+            "pacman",
+            "-S",
+            "--needed",
+            "--noconfirm",
         ] + packages
 
+    def resolve_real_name(self, chroot_dir: str, pkg: str) -> list[str]:
+        """
+        This command prints a real name of a package. For example, it prints the package which provides a virtual package.
+        """
+        return [
+            "arch-nspawn",
+            chroot_dir,
+            "pacman",
+            "-Sddp",
+            "--print-format=%n",
+            pkg,
+        ]
+
     def remove_chroot_packages(self, chroot_dir: str, packages: list[str]):
         """
         Running this command removes the given packages from the given chroot.
         """
-        return ["arch-nspawn", chroot_dir, "pacman", "-Rsu", "--noconfirm"
-                ] + packages
+        return ["arch-nspawn", chroot_dir, "pacman", "-Rsu", "--noconfirm"] + packages
 
-    def make_chroot_pkg(self, chroot_wd_dir: str, user: str,
-                        pkgfiles_to_install: list[str]) -> list[str]:
+    def make_chroot_pkg(
+        self, chroot_wd_dir: str, user: str, pkgfiles_to_install: list[str]
+    ) -> list[str]:
         """
         Running this command creates a package file using the given chroot.
         The package is created as the user and the pkg_files_to_install are installed
         in the chroot before the package is created.
         """
-        makechrootpkg_cmd = [
-            "makechrootpkg", "-c", "-r", chroot_wd_dir, "-U", user
-        ]
+        makechrootpkg_cmd = ["makechrootpkg", "-c", "-r", chroot_wd_dir, "-U", user]
 
         for pkgfile in pkgfiles_to_install:
             makechrootpkg_cmd += ["-I", pkgfile]
@@ -210,9 +223,9 @@ pacman_output_keywords: list[str] = [
     "pacsave",
     "pacnew",
     # These cause too many false positives IMO
-    #"warning",
-    #"error",
-    #"note",
+    # "warning",
+    # "error",
+    # "note",
 ]
 print_pacman_output_highlights: bool = True
 

src/decman/lib/__init__.py

@@ -2,17 +2,18 @@
 Library module for decman.
 """
 
-import threading
-import sys
-import shutil
-import subprocess
 import json
 import os
-import typing
+import shutil
+import subprocess
+import sys
+import threading
 import time
+import typing
+
+import decman
 import decman.config as conf
 import decman.error as err
-import decman
 
 _DECMAN_MSG_TAG = "[\033[1;35mDECMAN\033[m]"
 _RED_PREFIX = "\033[91m"
@@ -60,12 +61,14 @@ def print_summary(msg: str):
     print(f"{_DECMAN_MSG_TAG} {_CYAN_PREFIX}SUMMARY{_RESET_SUFFIX}: {msg}")
 
 
-def print_list(msg: str,
-               l: list[str],
-               elements_per_line: typing.Optional[int] = None,
-               max_line_width: typing.Optional[int] = None,
-               limit_to_term_size: bool = True,
-               level: int = SUMMARY):
+def print_list(
+    msg: str,
+    l: list[str],
+    elements_per_line: typing.Optional[int] = None,
+    max_line_width: typing.Optional[int] = None,
+    limit_to_term_size: bool = True,
+    level: int = SUMMARY,
+):
     """
     Prints a summary message to the user along with a list of elements.
 
@@ -89,8 +92,11 @@ def print_list(msg: str,
         max_line_width = 2**32  # Big enough to basically be unlimited
 
     if limit_to_term_size:
-        max_line_width = shutil.get_terminal_size().columns - len(
-            _SPACING) - len(_CONTINUATION_PREFIX)
+        max_line_width = (
+            shutil.get_terminal_size().columns
+            - len(_SPACING)
+            - len(_CONTINUATION_PREFIX)
+        )
 
     lines = [f"{l.pop(0)}"]
     index = 0
@@ -131,10 +137,9 @@ def print_debug(msg: str):
         print(f"{_DECMAN_MSG_TAG} {_GRAY_PREFIX}DEBUG{_RESET_SUFFIX}: {msg}")
 
 
-def prompt_number(msg: str,
-                  min_num: int,
-                  max_num: int,
-                  default: typing.Optional[int] = None) -> int:
+def prompt_number(
+    msg: str, min_num: int, max_num: int, default: typing.Optional[int] = None
+) -> int:
     """
     Prompts the user for a integer.
     """
@@ -263,11 +268,12 @@ class Store:
         if latest_path is None:
             return None
 
-        assert latest_version is not None, "If latest_path is set, then latest_version is set."
+        assert latest_version is not None, (
+            "If latest_path is set, then latest_version is set."
+        )
         return (latest_version, latest_path)
 
-    def add_package_to_cache(self, package: str, version: str,
-                             path_to_built_pkg: str):
+    def add_package_to_cache(self, package: str, version: str, path_to_built_pkg: str):
         """
         Adds a built package to the package file cache. Tries to remove excess cached packages.
         """
@@ -332,14 +338,13 @@ class Store:
 
         d = {
             "source_file": self.source_file,
-            "allow_running_source_without_prompt":
-            self.allow_running_source_without_prompt,
+            "allow_running_source_without_prompt": self.allow_running_source_without_prompt,
             "enabled_systemd_units": self.enabled_systemd_units,
             "enabled_user_systemd_units": self._enabled_user_systemd_units,
             "enabled_modules": self.enabled_modules,
             "created_files": self.created_files,
             "package_file_cache": self._package_file_cache,
-            "pkgbuild_git_commits": self.pkgbuild_latest_reviewed_commits
+            "pkgbuild_git_commits": self.pkgbuild_latest_reviewed_commits,
         }
 
         try:
@@ -370,7 +375,8 @@ class Store:
 
                 store.source_file = d.get("source_file", None)
                 store.allow_running_source_without_prompt = d.get(
-                    "allow_running_source_without_prompt", False)
+                    "allow_running_source_without_prompt", False
+                )
                 store.enabled_systemd_units = d.get(
                     "enabled_systemd_units",
                     [],
@@ -390,12 +396,10 @@ class Store:
             return store
         except json.JSONDecodeError as e:
             print_error(f"{e}")
-            raise err.UserFacingError(
-                "Failed to parse decman store json.") from e
+            raise err.UserFacingError("Failed to parse decman store json.") from e
         except OSError as e:
             print_error(f"{e}")
-            raise err.UserFacingError(
-                "Failed to read saved decman store.") from e
+            raise err.UserFacingError("Failed to read saved decman store.") from e
 
 
 class Source:
@@ -455,7 +459,8 @@ class Source:
         """
         for module in self.modules:
             if module.enabled and module.version != store.enabled_modules.get(
-                    module.name, module.version):
+                module.name, module.version
+            ):
                 module.after_version_change()
             elif module.enabled and module.name not in store.enabled_modules:
                 module.after_version_change()
@@ -467,8 +472,10 @@ class Source:
         """
         created_files = []
 
-        def install_files(files: dict[str, decman.File],
-                          variables: typing.Optional[dict[str, str]] = None):
+        def install_files(
+            files: dict[str, decman.File],
+            variables: typing.Optional[dict[str, str]] = None,
+        ):
             for target, file in files.items():
                 created_files.append(target)
 
@@ -481,19 +488,24 @@ class Source:
                 except OSError as e:
                     print_error(f"{e}")
                     raise err.UserFacingError(
-                        f"Failed to install file to {target}.") from e
+                        f"Failed to install file to {target}."
+                    ) from e
 
-        def install_dirs(dirs: dict[str, decman.Directory],
-                         variables: typing.Optional[dict[str, str]] = None):
+        def install_dirs(
+            dirs: dict[str, decman.Directory],
+            variables: typing.Optional[dict[str, str]] = None,
+        ):
             for target, directory in dirs.items():
                 try:
                     print_debug(f"Installing directory to {target}.")
                     created_files.extend(
-                        directory.copy_to(target, variables, only_print))
+                        directory.copy_to(target, variables, only_print)
+                    )
                 except OSError as e:
                     print_error(f"{e}")
                     raise err.UserFacingError(
-                        f"Failed to install directory to {target}.") from e
+                        f"Failed to install directory to {target}."
+                    ) from e
 
         install_files(self.files)
         install_dirs(self.directories)
@@ -531,8 +543,7 @@ class Source:
 
         return all_dirs
 
-    def files_to_remove(self, store: Store,
-                        created_files: list[str]) -> list[str]:
+    def files_to_remove(self, store: Store, created_files: list[str]) -> list[str]:
         """
         Returns all files that should be removed.
         """
@@ -587,8 +598,7 @@ class Source:
                 result[user] = entry
         return result
 
-    def packages_to_remove(
-            self, currently_installed_packages: list[str]) -> list[str]:
+    def packages_to_remove(self, currently_installed_packages: list[str]) -> list[str]:
         """
         Returns all packages that should be removed. This includes pacman, aur and user packages.
         """
@@ -601,7 +611,8 @@ class Source:
         return result
 
     def pacman_packages_to_install(
-            self, currently_installed_packages: list[str]) -> list[str]:
+        self, currently_installed_packages: list[str]
+    ) -> list[str]:
         """
         Returns all pacman packages that should be installed.
         """
@@ -614,7 +625,8 @@ class Source:
         return result
 
     def foreign_packages_to_install(
-            self, currently_installed_packages: list[str]) -> list[str]:
+        self, currently_installed_packages: list[str]
+    ) -> list[str]:
         """
         Returns all aur and user packages that should be installed.
         """
@@ -704,11 +716,16 @@ class Pacman:
         """
 
         try:
-            packages = subprocess.run(
-                conf.commands.list_pkgs(),
-                check=True,
-                stdout=subprocess.PIPE,
-            ).stdout.decode().strip().split('\n')
+            packages = (
+                subprocess.run(
+                    conf.commands.list_pkgs(),
+                    check=True,
+                    stdout=subprocess.PIPE,
+                )
+                .stdout.decode()
+                .strip()
+                .split("\n")
+            )
             return packages
         except subprocess.CalledProcessError as error:
             raise err.UserFacingError(
@@ -722,9 +739,12 @@ class Pacman:
         if dep in self._installable:
             return self._installable[dep]
 
-        result = subprocess.run(conf.commands.is_installable(dep),
-                                check=False,
-                                capture_output=True).returncode == 0
+        result = (
+            subprocess.run(
+                conf.commands.is_installable(dep), check=False, capture_output=True
+            ).returncode
+            == 0
+        )
         self._installable[dep] = result
         return result
 
@@ -734,18 +754,23 @@ class Pacman:
         basically AUR packages.
         """
         try:
-            output = subprocess.run(
-                conf.commands.list_foreign_pkgs_versioned(),
-                check=True,
-                stdout=subprocess.PIPE).stdout.decode().strip().split('\n')
+            output = (
+                subprocess.run(
+                    conf.commands.list_foreign_pkgs_versioned(),
+                    check=True,
+                    stdout=subprocess.PIPE,
+                )
+                .stdout.decode()
+                .strip()
+                .split("\n")
+            )
         except subprocess.CalledProcessError as error:
             raise err.UserFacingError(
                 f"Failed to get foreign packages using '{error.cmd}'. Output: {error.stdout}."
             ) from error
 
         try:
-            return [(line.split(" ")[0], line.split(" ")[1])
-                    for line in output]
+            return [(line.split(" ")[0], line.split(" ")[1]) for line in output]
         except IndexError as error:
             raise err.UserFacingError(
                 f"Failed to parse foreign packages from pacman output. Output: {output}"
@@ -759,7 +784,8 @@ class Pacman:
             return
 
         returncode, output = echo_and_capture_command(
-            conf.commands.install_pkgs(packages))
+            conf.commands.install_pkgs(packages)
+        )
         if returncode != 0:
             raise err.UserFacingError(
                 f"Failed to install packages using pacman. Process exited with code {returncode}."
@@ -768,9 +794,11 @@ class Pacman:
             print_highlighted_pacman_messages(output)
 
         try:
-            subprocess.run(conf.commands.set_as_explicitly_installed(packages),
-                           check=True,
-                           capture_output=conf.suppress_command_output)
+            subprocess.run(
+                conf.commands.set_as_explicitly_installed(packages),
+                check=True,
+                capture_output=conf.suppress_command_output,
+            )
         except subprocess.CalledProcessError as error:
             raise err.UserFacingError(
                 "Failed to set packages as explicitly installed using pacman."
@@ -783,8 +811,7 @@ class Pacman:
         if not deps:
             return
 
-        returncode, output = echo_and_capture_command(
-            conf.commands.install_deps(deps))
+        returncode, output = echo_and_capture_command(conf.commands.install_deps(deps))
         if returncode != 0:
             raise err.UserFacingError(
                 f"Failed to install packages as dependencies using pacman. Process exited with code {returncode}."
@@ -801,7 +828,8 @@ class Pacman:
             return
 
         returncode, output = echo_and_capture_command(
-            conf.commands.install_files(files))
+            conf.commands.install_files(files)
+        )
         if returncode != 0:
             raise err.UserFacingError(
                 f"Failed to install package files using pacman. Process exited with code {returncode}."
@@ -814,7 +842,8 @@ class Pacman:
                 subprocess.run(
                     conf.commands.set_as_explicitly_installed(as_explicit),
                     check=True,
-                    capture_output=conf.suppress_command_output)
+                    capture_output=conf.suppress_command_output,
+                )
         except subprocess.CalledProcessError as error:
             if conf.suppress_command_output:
                 print_error("Output:")
@@ -842,8 +871,7 @@ class Pacman:
         if not packages:
             return
 
-        returncode, output = echo_and_capture_command(
-            conf.commands.remove(packages))
+        returncode, output = echo_and_capture_command(conf.commands.remove(packages))
         if returncode != 0:
             raise err.UserFacingError(
                 f"Failed to remove packages using pacman. Process exited with code {returncode}."
@@ -861,7 +889,7 @@ def print_highlighted_pacman_messages(output: str):
     for index, line in enumerate(lines):
         for keyword in conf.pacman_output_keywords:
             if keyword.lower() in line.lower():
-                print_summary(f"lines: {index}-{index+2}")
+                print_summary(f"lines: {index}-{index + 2}")
                 if index >= 1:
                     print_continuation(lines[index - 1])
                 print_continuation(line)
@@ -879,10 +907,9 @@ def echo_and_capture_command(program: list[str]) -> tuple[int, str]:
 
     Returns a tuple containing the return code of the program as well as all output of the program.
     """
-    with subprocess.Popen(program,
-                          stdin=subprocess.PIPE,
-                          stdout=subprocess.PIPE,
-                          stderr=subprocess.STDOUT) as process:
+    with subprocess.Popen(
+        program, stdin=subprocess.PIPE, stdout=subprocess.PIPE, stderr=subprocess.STDOUT
+    ) as process:
         os.set_blocking(process.stdout.fileno(), False)
 
         output_thread = _OutputCapturingThread(process.stdout)
@@ -915,7 +942,6 @@ def echo_and_capture_command(program: list[str]) -> tuple[int, str]:
 
 
 class _OutputCapturingThread(threading.Thread):
-
     def __init__(self, stream):
         super().__init__()
         self._stream = stream
@@ -948,12 +974,15 @@ class Systemd:
             return
 
         try:
-            subprocess.run(conf.commands.enable_units(units),
-                           check=True,
-                           capture_output=conf.suppress_command_output)
+            subprocess.run(
+                conf.commands.enable_units(units),
+                check=True,
+                capture_output=conf.suppress_command_output,
+            )
         except subprocess.CalledProcessError as error:
             raise err.UserFacingError(
-                f"Failed to enable systemd units: {units}") from error
+                f"Failed to enable systemd units: {units}"
+            ) from error
         self.state.enabled_systemd_units += units
 
     def disable_units(self, units: list[str]):
@@ -964,12 +993,15 @@ class Systemd:
             return
 
         try:
-            subprocess.run(conf.commands.disable_units(units),
-                           check=True,
-                           capture_output=conf.suppress_command_output)
+            subprocess.run(
+                conf.commands.disable_units(units),
+                check=True,
+                capture_output=conf.suppress_command_output,
+            )
         except subprocess.CalledProcessError as error:
             raise err.UserFacingError(
-                f"Failed to disable systemd units: {units}") from error
+                f"Failed to disable systemd units: {units}"
+            ) from error
         for unit in units:
             try:
                 self.state.enabled_systemd_units.remove(unit)
@@ -984,9 +1016,11 @@ class Systemd:
             return
 
         try:
-            subprocess.run(conf.commands.enable_user_units(units, user),
-                           check=True,
-                           capture_output=conf.suppress_command_output)
+            subprocess.run(
+                conf.commands.enable_user_units(units, user),
+                check=True,
+                capture_output=conf.suppress_command_output,
+            )
         except subprocess.CalledProcessError as error:
             raise err.UserFacingError(
                 f"Failed to enable systemd units: {units} for {user}."
@@ -1003,9 +1037,11 @@ class Systemd:
             return
 
         try:
-            subprocess.run(conf.commands.disable_user_units(units, user),
-                           check=True,
-                           capture_output=conf.suppress_command_output)
+            subprocess.run(
+                conf.commands.disable_user_units(units, user),
+                check=True,
+                capture_output=conf.suppress_command_output,
+            )
         except subprocess.CalledProcessError as error:
             raise err.UserFacingError(
                 f"Failed to disable systemd units: {units} for {user}."

src/decman/lib/fpm.py

@@ -11,18 +11,18 @@ Terminology:
 - all dependencies: normal dependencies and build dependencies combined
 """
 
-import shutil
-import subprocess
 import os
 import re
+import shutil
+import subprocess
 import typing
 
 import requests
 
 import decman
 import decman.config as conf
-import decman.lib as l
 import decman.error as err
+import decman.lib as l
 
 
 def strip_dependency(dep: str) -> str:
@@ -58,10 +58,18 @@ class PackageInfo:
     In case of AUR packages, these are fetched from AUR RPC.
     """
 
-    def __init__(self, pkgname: str, pkgbase: str, version: str,
-                 provides: list[str], dependencies: list[str],
-                 make_dependencies: list[str], check_dependencies: list[str],
-                 git_url: str, pacman: l.Pacman):
+    def __init__(
+        self,
+        pkgname: str,
+        pkgbase: str,
+        version: str,
+        provides: list[str],
+        dependencies: list[str],
+        make_dependencies: list[str],
+        check_dependencies: list[str],
+        git_url: str,
+        pacman: l.Pacman,
+    ):
         self.pkgname = pkgname
         self.pkgbase = pkgbase
         self.version = version
@@ -79,22 +87,23 @@ class PackageInfo:
             if pacman.is_installable(dep):
                 self.pacman_dependencies.append(dep)
             else:
-                self.foreign_dependencies_stripped.append(
-                    strip_dependency(dep))
+                self.foreign_dependencies_stripped.append(strip_dependency(dep))
 
         for make_dep in make_dependencies:
             if pacman.is_installable(make_dep):
                 self.pacman_make_dependencies.append(make_dep)
             else:
                 self.foreign_make_dependencies_stripped.append(
-                    strip_dependency(make_dep))
+                    strip_dependency(make_dep)
+                )
 
         for check_dep in check_dependencies:
             if pacman.is_installable(check_dep):
                 self.pacman_check_dependencies.append(check_dep)
             else:
                 self.foreign_check_dependencies_stripped.append(
-                    strip_dependency(check_dep))
+                    strip_dependency(check_dep)
+                )
 
     def pkg_file_prefix(self) -> str:
         """
@@ -103,8 +112,9 @@ class PackageInfo:
         return f"{self.pkgname}-{self.version}"
 
     @staticmethod
-    def from_user_package(user_package: decman.UserPackage,
-                          pacman: l.Pacman) -> "PackageInfo":
+    def from_user_package(
+        user_package: decman.UserPackage, pacman: l.Pacman
+    ) -> "PackageInfo":
         """
         Converts a UserPackage to PackageInfo
         """
@@ -132,8 +142,11 @@ class ForeignPackage:
 
     def __eq__(self, value: object, /) -> bool:
         if isinstance(value, self.__class__):
-            return self.name == value.name \
-                   and self._all_recursive_foreign_deps == value._all_recursive_foreign_deps
+            return (
+                self.name == value.name
+                and self._all_recursive_foreign_deps
+                == value._all_recursive_foreign_deps
+            )
         return False
 
     def __hash__(self) -> int:
@@ -145,8 +158,7 @@ class ForeignPackage:
     def __str__(self) -> str:
         return f"{self.name}"
 
-    def add_foreign_dependency_packages(self,
-                                        package_names: typing.Iterable[str]):
+    def add_foreign_dependency_packages(self, package_names: typing.Iterable[str]):
         """
         Adds dependencies to the package.
         """
@@ -174,8 +186,7 @@ class DepNode:
         Returns True if the given package name is in the parents of this DepNode.
         """
         for name, parent in self.parents.items():
-            if name == pkgname or parent.is_pkgname_in_parents_recursive(
-                    pkgname):
+            if name == pkgname or parent.is_pkgname_in_parents_recursive(pkgname):
                 return True
         return False
 
@@ -189,15 +200,15 @@ class DepGraph:
         self.package_nodes: dict[str, DepNode] = {}
         self._childless_node_names = set()
 
-    def add_requirement(self, child_pkgname: str,
-                        parent_pkgname: typing.Optional[str]):
+    def add_requirement(self, child_pkgname: str, parent_pkgname: typing.Optional[str]):
         """
         Adds a connection between two packages, creating the child package if it doesn't exist.
 
         The parent is the package that requires the child package.
         """
         child_node = self.package_nodes.get(
-            child_pkgname, DepNode(ForeignPackage(child_pkgname)))
+            child_pkgname, DepNode(ForeignPackage(child_pkgname))
+        )
         self.package_nodes[child_pkgname] = child_node
 
         if len(child_node.children) == 0:
@@ -212,7 +223,8 @@ class DepGraph:
             raise err.UserFacingError(
                 f"Foreign package dependency cycle detected involving '{child_pkgname}' \
 and '{parent_pkgname}'. Foreign package dependencies are also required \
-during package building and therefore dependency cycles cannot be handled.")
+during package building and therefore dependency cycles cannot be handled."
+            )
 
         parent_node.children[child_pkgname] = child_node
         child_node.parents[parent_pkgname] = parent_node
@@ -230,8 +242,7 @@ during package building and therefore dependency cycles cannot be handled.")
             childless_node = self.package_nodes[childless_node_name]
 
             for parent in childless_node.parents.values():
-                new_deps = childless_node.pkg.get_all_recursive_foreign_dep_pkgs(
-                )
+                new_deps = childless_node.pkg.get_all_recursive_foreign_dep_pkgs()
                 new_deps.add(childless_node.pkg.name)
                 parent.pkg.add_foreign_dependency_packages(new_deps)
                 del parent.children[childless_node_name]
@@ -254,6 +265,7 @@ class ExtendedPackageSearch:
         self._pacman = pacman
         self._package_info_cache: dict[str, PackageInfo] = {}
         self._dep_provider_cache: dict[str, PackageInfo] = {}
+        self._known_providers_cache: dict[str, list[str]] = {}
         self._user_packages: list[PackageInfo] = []
 
     def add_user_pkg(self, user_pkg: PackageInfo):
@@ -261,6 +273,15 @@ class ExtendedPackageSearch:
         Adds the given package to user packages.
         """
         self._user_packages.append(user_pkg)
+        self._cache_pkg(user_pkg)
+
+    def _cache_pkg(self, pkg: PackageInfo):
+        for provided_pkg in pkg.provides:
+            self._known_providers_cache[provided_pkg] = self._known_providers_cache.get(
+                provided_pkg, []
+            )
+            self._known_providers_cache[provided_pkg].append(pkg.pkgname)
+        self._package_info_cache[pkg.pkgname] = pkg
 
     def try_caching_packages(self, packages: list[str]):
         """
@@ -270,8 +291,7 @@ class ExtendedPackageSearch:
         times, because then those methods don't have to make new AUR RPC requests.
         """
 
-        packages = list(
-            filter(lambda p: p not in self._package_info_cache, packages))
+        packages = list(filter(lambda p: p not in self._package_info_cache, packages))
 
         if len(packages) == 0:
             return
@@ -281,8 +301,7 @@ class ExtendedPackageSearch:
         max_pkgs_per_request = 200
 
         while packages:
-            to_request = map(lambda p: f"arg[]={p}",
-                             packages[:max_pkgs_per_request])
+            to_request = map(lambda p: f"arg[]={p}", packages[:max_pkgs_per_request])
             packages = packages[max_pkgs_per_request:]
 
             url = f"https://aur.archlinux.org/rpc/v5/info?{'&'.join(to_request)}"
@@ -293,8 +312,7 @@ class ExtendedPackageSearch:
                 d = request.json()
 
                 if d["type"] == "error":
-                    raise err.UserFacingError(
-                        f"AUR RPC returned error: {d['error']}")
+                    raise err.UserFacingError(f"AUR RPC returned error: {d['error']}")
 
                 for result in d["results"]:
                     pkgname = result["Name"]
@@ -304,9 +322,8 @@ class ExtendedPackageSearch:
 
                     for user_package in self._user_packages:
                         if user_package.pkgname == pkgname:
-                            l.print_debug(
-                                f"'{pkgname}' found in user packages.")
-                            self._package_info_cache[pkgname] = user_package
+                            l.print_debug(f"'{pkgname}' found in user packages.")
+                            self._cache_pkg(user_package)
                             break
                     else:  # if not in user_packages then:
                         info = PackageInfo(
@@ -317,10 +334,10 @@ class ExtendedPackageSearch:
                             make_dependencies=result.get("MakeDepends", []),
                             check_dependencies=result.get("CheckDepends", []),
                             provides=result.get("Provides", []),
-                            git_url=
-                            f"https://aur.archlinux.org/{result['PackageBase']}.git",
-                            pacman=self._pacman)
-                        self._package_info_cache[pkgname] = info
+                            git_url=f"https://aur.archlinux.org/{result['PackageBase']}.git",
+                            pacman=self._pacman,
+                        )
+                        self._cache_pkg(info)
 
                 l.print_debug("Request completed.")
             except (requests.RequestException, KeyError) as e:
@@ -345,7 +362,7 @@ class ExtendedPackageSearch:
         for user_package in self._user_packages:
             if user_package.pkgname == package:
                 l.print_debug(f"'{package}' found in user packages.")
-                self._package_info_cache[package] = user_package
+                self._cache_pkg(user_package)
                 return user_package
 
         url = f"https://aur.archlinux.org/rpc/v5/info/{package}"
@@ -355,8 +372,7 @@ class ExtendedPackageSearch:
             d = request.json()
 
             if d["type"] == "error":
-                raise err.UserFacingError(
-                    f"AUR RPC returned error: {d['error']}")
+                raise err.UserFacingError(f"AUR RPC returned error: {d['error']}")
 
             if d["resultcount"] == 0:
                 l.print_debug(f"'{package}' not found.")
@@ -373,11 +389,11 @@ class ExtendedPackageSearch:
                 make_dependencies=result.get("MakeDepends", []),
                 check_dependencies=result.get("CheckDepends", []),
                 provides=result.get("Provides", []),
-                git_url=
-                f"https://aur.archlinux.org/{result['PackageBase']}.git",
-                pacman=self._pacman)
+                git_url=f"https://aur.archlinux.org/{result['PackageBase']}.git",
+                pacman=self._pacman,
+            )
 
-            self._package_info_cache[package] = info
+            self._cache_pkg(info)
 
             return info
         except (requests.RequestException, KeyError) as e:
@@ -386,8 +402,7 @@ class ExtendedPackageSearch:
                 f"Failed to fetch package information for {package} from AUR RPC."
             ) from e
 
-    def find_provider(
-            self, stripped_dependency: str) -> typing.Optional[PackageInfo]:
+    def find_provider(self, stripped_dependency: str) -> typing.Optional[PackageInfo]:
         """
         Finds a provider for a dependency.
 
@@ -410,25 +425,31 @@ class ExtendedPackageSearch:
 
         l.print_debug("No exact name matches found. Finding providers.")
 
-        user_pkg_results = []
+        known_pkg_results = self._known_providers_cache.get(stripped_dependency, [])
         for user_package in self._user_packages:
-            if stripped_dependency in user_package.provides:
-                user_pkg_results.append(user_package.pkgname)
+            if (
+                stripped_dependency in user_package.provides
+                and stripped_dependency not in known_pkg_results
+            ):
+                known_pkg_results.append(user_package.pkgname)
 
-        if len(user_pkg_results) == 1:
-            pkg = self.get_package_info(user_pkg_results[0])
+        if len(known_pkg_results) == 1:
+            pkg = self.get_package_info(known_pkg_results[0])
             assert pkg is not None
             l.print_debug(
-                f"Single provider for '{stripped_dependency}' found in user packages: '{pkg}'."
+                f"Single provider for '{stripped_dependency}' found in known packages: '{pkg}'."
             )
             self._dep_provider_cache[stripped_dependency] = pkg
             return pkg
 
-        if len(user_pkg_results) > 1:
-            return self._choose_provider(stripped_dependency, user_pkg_results,
-                                         "user packages")
+        if len(known_pkg_results) > 1:
+            return self._choose_provider(
+                stripped_dependency, known_pkg_results, "user packages"
+            )
 
-        url = f"https://aur.archlinux.org/rpc/v5/search/{stripped_dependency}?by=provides"
+        url = (
+            f"https://aur.archlinux.org/rpc/v5/search/{stripped_dependency}?by=provides"
+        )
         l.print_debug(
             f"Requesting providers for '{stripped_dependency}' from AUR. URL = {url}"
         )
@@ -437,8 +458,7 @@ class ExtendedPackageSearch:
             d = request.json()
 
             if d["type"] == "error":
-                raise err.UserFacingError(
-                    f"AUR RPC returned error: {d['error']}")
+                raise err.UserFacingError(f"AUR RPC returned error: {d['error']}")
 
             if d["resultcount"] == 0:
                 l.print_debug(f"'{stripped_dependency}' not found.")
@@ -461,8 +481,9 @@ class ExtendedPackageSearch:
                 f"Failed to search for {stripped_dependency} from AUR RPC."
             ) from e
 
-    def _choose_provider(self, dep: str, possible_providers: list[str],
-                         where: str) -> typing.Optional[PackageInfo]:
+    def _choose_provider(
+        self, dep: str, possible_providers: list[str], where: str
+    ) -> typing.Optional[PackageInfo]:
         min_selection = 1
         max_selection = len(possible_providers)
         l.print_summary(
@@ -478,7 +499,8 @@ class ExtendedPackageSearch:
             f"Select a provider [{min_selection}-{max_selection}] (default: {min_selection}): ",
             min_selection,
             max_selection,
-            default=min_selection)
+            default=min_selection,
+        )
 
         info = self.get_package_info(possible_providers[selection - 1])
         if info is not None:
@@ -541,16 +563,17 @@ class ForeignPackageManager:
     Class for dealing with foreign packages.
     """
 
-    def __init__(self, store: l.Store, pacman: l.Pacman,
-                 search: ExtendedPackageSearch):
+    def __init__(self, store: l.Store, pacman: l.Pacman, search: ExtendedPackageSearch):
         self._store = store
         self._pacman = pacman
         self._search = search
 
-    def upgrade(self,
-                upgrade_devel: bool = False,
-                force: bool = False,
-                ignored_pkgs: typing.Optional[set[str]] = None):
+    def upgrade(
+        self,
+        upgrade_devel: bool = False,
+        force: bool = False,
+        ignored_pkgs: typing.Optional[set[str]] = None,
+    ):
         """
         Upgrades all foreign packages.
         """
@@ -561,11 +584,9 @@ class ForeignPackageManager:
 
         all_foreign_pkgs = self._pacman.get_versioned_foreign_packages()
         all_explicit_pkgs = set(self._pacman.get_installed())
-        l.print_debug(
-            f"Foreign packages to check for upgrades: {all_foreign_pkgs}")
+        l.print_debug(f"Foreign packages to check for upgrades: {all_foreign_pkgs}")
 
-        self._search.try_caching_packages(
-            list(map(lambda p: p[0], all_foreign_pkgs)))
+        self._search.try_caching_packages(list(map(lambda p: p[0], all_foreign_pkgs)))
 
         as_explicit = []
         as_deps = []
@@ -579,8 +600,7 @@ class ForeignPackageManager:
                     f"Failed to find '{pkg}' from AUR or user provided packages."
                 )
 
-            if self.should_upgrade_package(pkg, ver, info.version,
-                                           upgrade_devel):
+            if self.should_upgrade_package(pkg, ver, info.version, upgrade_devel):
                 if pkg in all_explicit_pkgs:
                     as_explicit.append(pkg)
                 else:
@@ -592,10 +612,12 @@ class ForeignPackageManager:
 
         self.install(as_explicit, as_deps, force)
 
-    def install(self,
-                foreign_pkgs: list[str],
-                foreign_dep_pkgs: typing.Optional[list[str]] = None,
-                force: bool = False):
+    def install(
+        self,
+        foreign_pkgs: list[str],
+        foreign_dep_pkgs: typing.Optional[list[str]] = None,
+        force: bool = False,
+    ):
         """
         Installs the given foreign packages and their dependencies (both pacman/AUR).
         """
@@ -607,39 +629,44 @@ class ForeignPackageManager:
             return
 
         resolved_dependencies = self.resolve_dependencies(
-            foreign_pkgs, foreign_dep_pkgs)
+            foreign_pkgs, foreign_dep_pkgs
+        )
 
         l.print_list(
             "The following foreign packages will be installed explicitly:",
             list(resolved_dependencies.foreign_pkgs),
-            level=l.SUMMARY)
+            level=l.SUMMARY,
+        )
 
         l.print_list(
             "The following foreign packages will be installed as dependencies:",
             list(resolved_dependencies.foreign_dep_pkgs),
-            level=l.SUMMARY)
+            level=l.SUMMARY,
+        )
 
         l.print_list(
             "The following foreign packages will be built in order to install other packages. They will not be installed:",
             list(resolved_dependencies.foreign_build_dep_pkgs),
-            level=l.SUMMARY)
+            level=l.SUMMARY,
+        )
 
         if not l.prompt_confirm("Proceed?", default=True):
             raise err.UserFacingError("Installing aborted.")
 
         l.print_summary("Installing foreign package dependencies from pacman.")
-        self._pacman.install_dependencies(
-            list(resolved_dependencies.pacman_deps))
+        self._pacman.install_dependencies(list(resolved_dependencies.pacman_deps))
 
         try:
-            with PackageBuilder(self._search, self._store,
-                                resolved_dependencies) as builder:
+            with PackageBuilder(
+                self._search, self._store, resolved_dependencies
+            ) as builder:
                 while resolved_dependencies.build_order:
                     to_build = resolved_dependencies.build_order.pop(0)
 
                     pkgbase = resolved_dependencies.get_pkgbase(to_build)
                     package_names = resolved_dependencies.get_pkgs_with_common_pkgbase(
-                        to_build)
+                        to_build
+                    )
 
                     packages = [
                         resolved_dependencies.packages[pkgname]
@@ -663,16 +690,17 @@ class ForeignPackageManager:
 
         if package_files_to_install or force:
             l.print_summary("Installing foreign packages.")
-            self._pacman.install_files(package_files_to_install,
-                                       as_explicit=list(
-                                           resolved_dependencies.foreign_pkgs))
+            self._pacman.install_files(
+                package_files_to_install,
+                as_explicit=list(resolved_dependencies.foreign_pkgs),
+            )
         else:
             l.print_summary("No packages to install.")
 
     def resolve_dependencies(
         self,
         foreign_pkgs: list[str],
-        foreign_dep_pkgs: typing.Optional[list[str]] = None
+        foreign_dep_pkgs: typing.Optional[list[str]] = None,
     ) -> ResolvedDependencies:
         """
         Resolves foreign dependencies of foreign packages.
@@ -690,7 +718,7 @@ class ForeignPackageManager:
 
         graph = DepGraph()
 
-        for name in (foreign_pkgs + foreign_dep_pkgs):
+        for name in foreign_pkgs + foreign_dep_pkgs:
             graph.add_requirement(name, None)
 
         seen_packages = set(foreign_pkgs + foreign_dep_pkgs)
@@ -709,8 +737,7 @@ class ForeignPackageManager:
 
             add_to.add(dep_info.pkgname)
 
-            l.print_debug(
-                f"Adding dependency {dep_info.pkgname} to package {pkgname}.")
+            l.print_debug(f"Adding dependency {dep_info.pkgname} to package {pkgname}.")
             graph.add_requirement(dep_info.pkgname, pkgname)
             if dep_info.pkgname not in seen_packages:
                 to_process.append(dep_info.pkgname)
@@ -728,10 +755,14 @@ class ForeignPackageManager:
             result.pacman_deps.update(info.pacman_dependencies)
             result.add_pkgbase_info(pkgname, info.pkgbase)
 
-            build_deps = info.foreign_make_dependencies_stripped + info.foreign_check_dependencies_stripped
+            build_deps = (
+                info.foreign_make_dependencies_stripped
+                + info.foreign_check_dependencies_stripped
+            )
 
             self._search.try_caching_packages(
-                info.foreign_dependencies_stripped + build_deps)
+                info.foreign_dependencies_stripped + build_deps
+            )
 
             for depname in info.foreign_dependencies_stripped:
                 process_dep(pkgname, depname, result.foreign_dep_pkgs)
@@ -758,26 +789,29 @@ class ForeignPackageManager:
 
         return result
 
-    def should_upgrade_package(self,
-                               package: str,
-                               installed_version: str,
-                               fetched_version: str,
-                               upgrade_devel=False) -> bool:
+    def should_upgrade_package(
+        self,
+        package: str,
+        installed_version: str,
+        fetched_version: str,
+        upgrade_devel=False,
+    ) -> bool:
         """
         Returns True if a package should be upgraded.
         """
 
         if upgrade_devel and is_devel(package):
-            l.print_debug(
-                f"Package {package} is devel package. It should be upgraded.")
+            l.print_debug(f"Package {package} is devel package. It should be upgraded.")
             return True
 
         try:
             result = int(
-                subprocess.run(conf.commands.compare_versions(
-                    installed_version, fetched_version),
-                               check=True,
-                               stdout=subprocess.PIPE).stdout.decode())
+                subprocess.run(
+                    conf.commands.compare_versions(installed_version, fetched_version),
+                    check=True,
+                    stdout=subprocess.PIPE,
+                ).stdout.decode()
+            )
             should_upgrade = result < 0
             l.print_debug(
                 f"Installed version is: {installed_version}. Available version is {fetched_version}. Should upgrade: {should_upgrade}"
@@ -786,7 +820,8 @@ class ForeignPackageManager:
         except (ValueError, subprocess.CalledProcessError) as error:
             l.print_error(f"{error}")
             raise err.UserFacingError(
-                "Failed to compare versions using vercmp.") from error
+                "Failed to compare versions using vercmp."
+            ) from error
 
 
 class PackageBuilder:
@@ -796,8 +831,12 @@ class PackageBuilder:
 
     always_included_packages = ["base-devel", "git"]
 
-    def __init__(self, search: ExtendedPackageSearch, store: l.Store,
-                 resolved_deps: ResolvedDependencies):
+    def __init__(
+        self,
+        search: ExtendedPackageSearch,
+        store: l.Store,
+        resolved_deps: ResolvedDependencies,
+    ):
         self._search = search
         self._store = store
         self._resolved_deps = resolved_deps
@@ -850,7 +889,8 @@ class PackageBuilder:
             os.chdir(pkgbuild_dir)
 
             git_url_info = self._search.get_package_info(
-                self._resolved_deps.get_some_pkgname(pkgbase))
+                self._resolved_deps.get_some_pkgname(pkgbase)
+            )
 
             # Because all dependencies and packages should be resolved during the creation
             # of ResolvedDependencies. git_url should not be None.
@@ -869,16 +909,16 @@ class PackageBuilder:
         mkarchroot_env_vars = os.environ.copy()
         try:
             del mkarchroot_env_vars["GNUPGHOME"]
-            l.print_debug(
-                "Removed GNUPGHOME variable from mkarchroot environment.")
+            l.print_debug("Removed GNUPGHOME variable from mkarchroot environment.")
         except KeyError:
             pass
 
-        subprocess.run(conf.commands.make_chroot(self.chroot_dir,
-                                                 list(self._pkgs_in_chroot)),
-                       env=mkarchroot_env_vars,
-                       check=True,
-                       capture_output=conf.suppress_command_output)
+        subprocess.run(
+            conf.commands.make_chroot(self.chroot_dir, list(self._pkgs_in_chroot)),
+            env=mkarchroot_env_vars,
+            check=True,
+            capture_output=conf.suppress_command_output,
+        )
 
     def remove_build_environment(self):
         """
@@ -886,8 +926,9 @@ class PackageBuilder:
         """
         shutil.rmtree(conf.build_dir)
 
-    def build_packages(self, package_base: str, packages: list[ForeignPackage],
-                       force: bool):
+    def build_packages(
+        self, package_base: str, packages: list[ForeignPackage], force: bool
+    ):
         """
         Builds package(s) with the same package base.
 
@@ -906,8 +947,7 @@ class PackageBuilder:
 
         l.print_info(f"Building '{' '.join(package_names)}'.")
 
-        chroot_new_pacman_pkgs, chroot_pkg_files = self._get_chroot_packages(
-            packages)
+        chroot_new_pacman_pkgs, chroot_pkg_files = self._get_chroot_packages(packages)
 
         pkgbuild_dir = self.pkgbase_dir_map[package_base]
         os.chdir(pkgbuild_dir)
@@ -918,19 +958,24 @@ class PackageBuilder:
 
         l.print_info("Installing build dependencies to chroot.")
 
-        subprocess.run(conf.commands.install_chroot_packages(
-            self.chroot_dir,
-            chroot_new_pacman_pkgs + PackageBuilder.always_included_packages),
-                       check=True,
-                       capture_output=conf.suppress_command_output)
+        subprocess.run(
+            conf.commands.install_chroot_packages(
+                self.chroot_dir,
+                chroot_new_pacman_pkgs + PackageBuilder.always_included_packages,
+            ),
+            check=True,
+            capture_output=conf.suppress_command_output,
+        )
 
         l.print_info("Making package.")
 
-        subprocess.run(conf.commands.make_chroot_pkg(self.chroot_wd_dir,
-                                                     conf.makepkg_user,
-                                                     chroot_pkg_files),
-                       check=True,
-                       capture_output=conf.quiet_output)
+        subprocess.run(
+            conf.commands.make_chroot_pkg(
+                self.chroot_wd_dir, conf.makepkg_user, chroot_pkg_files
+            ),
+            check=True,
+            capture_output=conf.quiet_output,
+        )
 
         for pkgname in package_names:
             file = self._find_pkgfile(pkgname, pkgbuild_dir)
@@ -952,16 +997,25 @@ class PackageBuilder:
 
         l.print_info("Removing build dependencies from chroot.")
 
-        # FIX: If installed packages are virtual packages, removing them wont succeed.
         if len(chroot_new_pacman_pkgs) != 0:
             to_remove = []
             for p in chroot_new_pacman_pkgs:
                 if p not in self._pkgs_in_chroot:
-                    to_remove.append(strip_dependency(p))
-            subprocess.run(conf.commands.remove_chroot_packages(
-                self.chroot_dir, to_remove),
-                           check=True,
-                           capture_output=conf.suppress_command_output)
+                    real_pkgname = (
+                        subprocess.run(
+                            conf.commands.resolve_real_name(self.chroot_dir, p),
+                            check=True,
+                            stdout=subprocess.PIPE,
+                        )
+                        .stdout.decode()
+                        .strip()
+                    )
+                    to_remove.append(real_pkgname)
+            subprocess.run(
+                conf.commands.remove_chroot_packages(self.chroot_dir, to_remove),
+                check=True,
+                capture_output=conf.suppress_command_output,
+            )
 
         l.print_info(f"Finished building: '{' '.join(package_names)}'.")
 
@@ -984,7 +1038,7 @@ class PackageBuilder:
         return True
 
     def _get_chroot_packages(
-            self, pkgs_to_build: list[ForeignPackage]
+        self, pkgs_to_build: list[ForeignPackage]
     ) -> tuple[list[str], list[str]]:
         """
         Returns a tuple of pacman build dependencies and built foreign pkgs files that are needed
@@ -1030,8 +1084,10 @@ class PackageBuilder:
 
         for foreign_pkg in chroot_foreign_pkgs:
             entry = self._store.get_package(foreign_pkg)
-            assert entry is not None, "Build order determines that the dependencies are built \
+            assert entry is not None, (
+                "Build order determines that the dependencies are built \
 before and thus are found in the cache."
+            )
 
             _, file = entry
 
@@ -1070,39 +1126,55 @@ before and thus are found in the cache."
         The user is prompted to review the PKGBUILD and confirm if the package should be built.
         """
         try:
-            subprocess.run(conf.commands.git_clone(git_url, "."),
-                           check=True,
-                           capture_output=conf.suppress_command_output)
+            subprocess.run(
+                conf.commands.git_clone(git_url, "."),
+                check=True,
+                capture_output=conf.suppress_command_output,
+            )
 
-            if l.prompt_confirm(f"Review PKGBUILD or show diff for {pkgbase}?",
-                                default=True):
-                latest_reviewed_commit = self._store.pkgbuild_latest_reviewed_commits.get(
-                    pkgbase)
+            if l.prompt_confirm(
+                f"Review PKGBUILD or show diff for {pkgbase}?", default=True
+            ):
+                latest_reviewed_commit = (
+                    self._store.pkgbuild_latest_reviewed_commits.get(pkgbase)
+                )
 
-                git_commit_ids = subprocess.run(
-                    conf.commands.git_log_commit_ids(),
-                    check=True,
-                    stdout=subprocess.PIPE,
-                ).stdout.decode().strip().split('\n')
+                git_commit_ids = (
+                    subprocess.run(
+                        conf.commands.git_log_commit_ids(),
+                        check=True,
+                        stdout=subprocess.PIPE,
+                    )
+                    .stdout.decode()
+                    .strip()
+                    .split("\n")
+                )
 
-                if latest_reviewed_commit is None or latest_reviewed_commit not in git_commit_ids:
+                if (
+                    latest_reviewed_commit is None
+                    or latest_reviewed_commit not in git_commit_ids
+                ):
                     for file in os.scandir("."):
                         if file.is_file() and not file.name.startswith("."):
-                            subprocess.run(conf.commands.review_file(
-                                file.path),
-                                           check=True)
+                            subprocess.run(
+                                conf.commands.review_file(file.path), check=True
+                            )
                 else:
                     subprocess.run(
-                        conf.commands.git_diff(latest_reviewed_commit),
-                        check=True)
+                        conf.commands.git_diff(latest_reviewed_commit), check=True
+                    )
 
             if l.prompt_confirm("Build this package?", default=True):
-                commit_id = subprocess.run(
-                    conf.commands.git_get_commit_id(),
-                    check=True,
-                    capture_output=True).stdout.decode().strip()
-                self._store.pkgbuild_latest_reviewed_commits[
-                    pkgbase] = commit_id
+                commit_id = (
+                    subprocess.run(
+                        conf.commands.git_get_commit_id(),
+                        check=True,
+                        capture_output=True,
+                    )
+                    .stdout.decode()
+                    .strip()
+                )
+                self._store.pkgbuild_latest_reviewed_commits[pkgbase] = commit_id
             else:
                 raise err.UserFacingError("Building aborted.")