chore: bump version to 0.5.1

Resolves #1 and #2

.gitignore

@@ -1 +1,3 @@
 template/*.pdf
+
+tests/

LICENSE.md

@@ -0,0 +1,21 @@
+MIT License
+
+Copyright (c) 2026 Dominykas Svetikas
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

README.md

@@ -1,3 +1,14 @@
 # ktu-paper
 
-This repository contains a Typst template for academic papers at the Kaunas University of Technology, Faculty of Informatics. A final Bachelor's thesis written with this template has successfully passed the formal review.
+This repository contains a Typst template for academic papers at the Kaunas University of Technology, Faculty of Informatics.
+
+I successfully wrote and defended a final Bachelor's thesis written with this template and continue to use for writing other reports.
+
+## Initiating the template
+Install the downloaded template under the following directory:
+- Linux: `~/.local/share/typst/packages/local/ktu-paper/0.5.1/`
+
+And then initiate a new project:
+```sh
+typst init @local/ktu-paper:0.5.1
+```

src/config.typ

@@ -1,9 +1,22 @@
+/// Whether to number figures per section or not.
+/// If true, figures will be numbered like "1.1", "1.2", "2.1", etc.
+/// If false, figures will be numbered like "1", "2", "3", etc.
+///
+/// TODO: figure out how to deal with numbering on sections such as
+/// Appendix and other non-standard sections.
+#let __FIG_PER_SECTION = state("svetikas.lt/ktu-paper/figure-numbering-per-section", false)
+
+/// Whether to uppercase section titles or not.
+/// If true, section titles will be uppercased.
+/// If false, section titles will be displayed as-is.
+#let __UPPERCASE_SECTION_TITLES = state("svetikas.lt/ktu-paper/uppercase-section-titles", false)
+
 #let __DEBUG_AUTHOR_TABLE = state("$ktu-template-DEBUG_AUTHOR_TABLE", false)
 #let debug-author-table() = {
-    __DEBUG_AUTHOR_TABLE.update(true)
+  __DEBUG_AUTHOR_TABLE.update(true)
 }
 
 #let __HEADING_EXPERIMENT = state("$ktu-template-HEADING_EXPERIMENT", false)
 #let enable-heading-experiment() = {
-    __HEADING_EXPERIMENT.update(true)
+  __HEADING_EXPERIMENT.update(true)
 }

src/figures.typ

@@ -0,0 +1,481 @@
+// This file includes logic for displaying figures in the document, including numbering, captions, and references. It also includes logic for handling figure numbering per section or globally, based on the configuration set in `config.typ`.
+#import "config.typ": __FIG_PER_SECTION
+
+// ---------------------------------------------------------------------------
+// Figure kinds
+// ---------------------------------------------------------------------------
+
+/// Localizations for the recognized referenceable figure kinds, keyed by `repr(func)`.
+/// - supplement: used in captions (the caption adds the separator, e.g. "1 pav.").
+/// - ref-name: used in references, e.g. "(žr. 1 pav.)". Either a string or a
+///   function `count => string`, called with the number of elements mentioned
+///   together, e.g. "(žr. 1 priedą)" vs "(žr. 1, 2 priedus)".
+/// - single-name: full word used when the figure is the only one of its kind and
+///   therefore unnumbered, e.g. "Paveikslas. ..." and "(žr. paveikslas)".
+#let __figure-kinds = (
+  table: (supplement: "lentelė", ref-name: "lentelė", single-name: "lentelė"),
+  image: (supplement: "pav", ref-name: "pav.", single-name: "paveikslas"),
+  raw: (supplement: "kodo frag", ref-name: "kodo frag.", single-name: "kodo fragmentas"),
+  equation: (supplement: "lygtis", ref-name: "formulė", single-name: "lygtis"),
+  // Appendices are headings, not figures, but they use the same referencing
+  appendix: (
+    supplement: "priedas",
+    ref-name: count => if count == 1 { "priedą" } else { "priedus" },
+    single-name: "priedas",
+  ),
+)
+
+/// Figure kinds registered by the document author via `ktu-paper(figureKinds: ...)`.
+#let __USER_FIGURE_KINDS = state("ktu-user-figure-kinds", (:))
+
+/// Validates author-supplied kinds and fills in defaults (`ref-name` falls back
+/// to `supplement`).
+#let __normalize-figure-kinds(kinds) = {
+  let normalized = (:)
+  for (key, spec) in kinds {
+    assert(
+      "supplement" in spec,
+      message: "figure kind `" + key + "` needs a `supplement`",
+    )
+    normalized.insert(key, (
+      supplement: spec.supplement,
+      ref-name: spec.at("ref-name", default: spec.supplement),
+      single-name: spec.at("single-name", default: spec.supplement),
+    ))
+  }
+  normalized
+}
+
+/// Recognized kinds merged with the author's. Must be called in a context.
+#let __all-figure-kinds() = __figure-kinds + __USER_FIGURE_KINDS.get()
+
+/// Resets all figure and equation counters (used when numbering per section).
+/// Must be called in a context.
+#let __reset-figure-counters() = {
+  let custom = (..__USER_FIGURE_KINDS.get().keys(),)
+  for kind in (image, table, raw, ..custom) {
+    counter(figure.where(kind: kind)).update(0)
+  }
+  counter(math.equation).update(0)
+}
+
+/// Returns the caption supplement text for a figure kind (e.g. `table`, `math.equation`).
+#let __fig-supplement(func) = __figure-kinds.at(repr(func)).supplement
+
+/// Finds the first recognized kind ("table", "image", "raw" or "equation") inside
+/// `node`, descending through wrappers (align, block, grid, stack, ...).
+/// Returns the key into `__figure-kinds`, or `none` if nothing is recognized.
+#let __find-figure-kind(node) = {
+  if type(node) != content { return none }
+
+  let key = repr(node.func())
+  if key in __figure-kinds { return key }
+
+  // Single-child wrappers
+  for field in ("body", "child") {
+    if node.has(field) {
+      let found = __find-figure-kind(node.at(field))
+      if found != none { return found }
+    }
+  }
+
+  // Multi-child containers
+  if node.has("children") {
+    for child in node.children {
+      let found = __find-figure-kind(child)
+      if found != none { return found }
+    }
+  }
+
+  none
+}
+
+/// Resolves the `__figure-kinds` key of a figure element. An explicit custom
+/// (string) kind always wins; otherwise the kind is detected from the body.
+#let __figure-key(fig) = {
+  if type(fig.kind) == str { return fig.kind }
+  let found = __find-figure-kind(fig.body)
+  if found != none { found } else { repr(fig.kind) }
+}
+
+/// Returns the caption supplement of a figure element.
+#let __figure-supplement-of(fig) = {
+  let key = __figure-key(fig)
+  let kinds = __all-figure-kinds()
+  assert(
+    key in kinds,
+    message: "unregistered figure kind `" + key + "`: register it with ktu-paper(figureKinds: ...)",
+  )
+  kinds.at(key).supplement
+}
+
+// ---------------------------------------------------------------------------
+// Numbering
+// ---------------------------------------------------------------------------
+
+/// Resolves a figure's number (global "1" or section-based "1.1") at `loc`,
+/// returned as a string.
+#let __get-figure-number(fig-item, loc) = {
+  assert(
+    type(fig-item) == content and fig-item.func() == figure,
+    message: "can only get figure number for figure elements",
+  )
+
+  let fig-counter = counter(figure.where(kind: fig-item.kind))
+
+  if __FIG_PER_SECTION.at(loc) {
+    let chapter = counter(heading).at(loc).at(0, default: 0)
+    let fig-num = fig-counter.at(loc).at(0, default: 1)
+    str(chapter) + "." + str(fig-num)
+  } else {
+    str(fig-counter.at(loc).at(0))
+  }
+}
+
+/// Resolves an equation's number (global "2" or section-based "1.2") at `loc` without parentheses.
+/// `loc` is the location of the equation.
+#let __get-equation-number(loc) = {
+  let number = counter(math.equation).at(loc).at(0)
+  if __FIG_PER_SECTION.at(loc) {
+    let chapter = counter(heading).at(loc).at(0, default: 0)
+    str(chapter) + "." + str(number)
+  } else {
+    str(number)
+  }
+}
+
+/// Numbering function for `math.equation`: "(2)" or, when numbering per
+/// section, "(1.2)".
+#let __equation-numbering(..nums) = context {
+  let number = nums.pos().first()
+  if __FIG_PER_SECTION.get() {
+    let chapter = counter(heading).get().at(0, default: 0)
+    // TODO: this is a hack to prevent the numbers from being completely
+    // part of a regex match against math.equation.
+    // It would be better to render math equation numbers as a separate element, so that regexes don't see them at all.
+    [(#box[#chapter].#box[#number])]
+  } else {
+    [(#number)]
+  }
+}
+
+/// Returns the number of a located figure element as a string, formatted
+/// according to the current numbering scheme.
+#let __get-locatable-element-number(element) = context {
+  assert(type(element) == content, message: "can only reference elements of type content")
+  assert(element.func() == figure, message: "referenced element does not have a figure function")
+  __get-figure-number(element, element.location())
+}
+
+/// Appendix headings carry an "appendix-heading" metadata marker as their
+/// first child (or as their whole body, when the appendix has no title) and
+/// are numbered separately from normal headings.
+#let __is-appendix-heading(item) = {
+  let body = item.body
+  if body.has("children") {
+    body.children.at(0, default: none) == metadata("appendix-heading")
+  } else {
+    body == metadata("appendix-heading")
+  }
+}
+
+/// Returns the title of an appendix heading element (everything after the
+/// marker), or `none` if the appendix has no title.
+#let __appendix-title(item) = {
+  let body = item.body
+  if not body.has("children") { return none }
+  let rest = body.children.slice(1)
+  if rest.len() == 0 { none } else { rest.join() }
+}
+
+/// Returns the number (int) of an appendix heading element: its position among
+/// all appendices, in document order. Must be called in a context.
+#let __appendix-number(item) = {
+  query(selector(heading).before(item.location(), inclusive: true))
+    .filter(h => __is-appendix-heading(h))
+    .len()
+}
+
+/// Parses a dotted number such as "12" or "1.12.5" into an array of ints.
+/// Returns `none` if any part is not purely numeric.
+#let __parse-number(value) = {
+  let parts = value.split(".")
+  if parts.all(p => p.match(regex("^\\d+$")) != none) {
+    parts.map(int)
+  } else {
+    none
+  }
+}
+
+/// Sorts `(location, number)` entries. If every number is numeric (optionally
+/// dotted, e.g. "1.12.5"), sorts component-wise numerically; otherwise falls
+/// back to plain string ordering.
+#let __sort-entries(entries) = {
+  let keys = entries.map(e => __parse-number(e.at(1)))
+  if keys.all(k => k != none) {
+    entries.zip(keys).sorted(key: pair => pair.at(1)).map(pair => pair.at(0))
+  } else {
+    entries.sorted(key: e => e.at(1))
+  }
+}
+
+// ---------------------------------------------------------------------------
+// Single-figure handling
+// ---------------------------------------------------------------------------
+
+/// Figure kinds that are left unnumbered when the document contains only one
+/// captioned figure of that kind: "Lentelė. Aprašas" and "(žr. lentelė)"
+/// instead of "1 lentelė. Aprašas" and "(žr. 1 lentelė)". The word used comes
+/// from the kind's `single-name`.
+/// Keys are `__figure-key` values.
+#let __UNNUMBERED_WHEN_SINGLE = ("table", "image")
+
+/// Whether `fig` is the only captioned figure of its kind in the document and
+/// its kind is listed in `__UNNUMBERED_WHEN_SINGLE`. Must be called in a context.
+#let __is-single-unnumbered(fig) = {
+  if __figure-key(fig) not in __UNNUMBERED_WHEN_SINGLE { return false }
+  query(figure.where(kind: fig.kind)).filter(f => f.caption != none).len() == 1
+}
+
+/// Capitalizes the first letter of `value` ("lentelė" -> "Lentelė").
+#let __capitalize(value) = {
+  let first = value.first()
+  upper(first) + value.slice(first.len())
+}
+
+/// Caption label of a figure element: "1 lentelė." normally, or
+/// "Lentelė." for a single unnumbered figure.
+#let __caption-label(fig) = context {
+  let supplement = __figure-supplement-of(fig)
+  if __is-single-unnumbered(fig) {
+    let name = __all-figure-kinds().at(__figure-key(fig)).single-name
+    [#__capitalize(name).]
+  } else {
+    [#__get-figure-number(fig, fig.location()) #supplement.]
+  }
+}
+
+// ---------------------------------------------------------------------------
+// References
+// ---------------------------------------------------------------------------
+
+/// Returns a number for the given reference target.
+/// Panics for a figure that is the only one of its kind,
+/// since such figures have no number.
+/// - target (label): Label to get the reference number for.
+#let ref-no(target) = context {
+  if type(target) != label {
+    panic("ref-no expects a label as input")
+  }
+
+  let item = query(target).first()
+  let loc = item.location()
+  let kind = item.func()
+
+  let number = if kind == figure {
+    if __is-single-unnumbered(item) {
+      panic(
+        "ref-no: "
+          + str(target)
+          + " is the only "
+          + __figure-key(item)
+          + " in the document and is therefore unnumbered; "
+          + "refer to it with @"
+          + str(target)
+          + " (or custom-ref) instead",
+      )
+    }
+    __get-figure-number(item, loc)
+  } else if kind == math.equation {
+    "(" + __get-equation-number(loc) + ")"
+  } else if kind == heading {
+    if __is-appendix-heading(item) {
+      str(__appendix-number(item))
+    } else {
+      counter(heading).at(loc).map(str).join(".")
+    }
+  } else {
+    panic("referencing unknown type: " + repr(kind))
+  }
+
+  link(loc, number)
+}
+
+/// Create a custom reference for multiple targets of the same type.
+/// - targets (label...): Labels to create a custom reference for.
+#let custom-ref(..targets) = context {
+  let group-key = none
+  let group-name = none // a string, or a function of the number of mentions
+  let single-name = none // set when the target is a lone, unnumbered figure
+  let entries = () // (location, number) pairs
+
+  for target in targets.pos() {
+    let item = query(target).first()
+    let loc = item.location()
+
+    // (kind key used for grouping, ref-name spec, number)
+    let (key, name, number) = if item.func() == math.equation {
+      ("equation", __figure-kinds.equation.ref-name, __get-equation-number(loc))
+    } else if item.func() == figure {
+      let kind = __figure-key(item)
+      let kinds = __all-figure-kinds()
+      if kind not in kinds {
+        panic("unregistered figure kind `" + kind + "`: register it with ktu-paper(figureKinds: ...)")
+      }
+      if __is-single-unnumbered(item) { single-name = kinds.at(kind).single-name }
+      (kind, kinds.at(kind).ref-name, __get-figure-number(item, loc))
+    } else if item.func() == heading and __is-appendix-heading(item) {
+      ("appendix", __figure-kinds.appendix.ref-name, str(__appendix-number(item)))
+    } else {
+      panic("referencing unknown type: " + repr(item.func()))
+    }
+
+    if group-key != none and group-key != key {
+      panic("custom-ref does not support grouping different elements together")
+    }
+    group-key = key
+    group-name = name
+    entries.push((loc, number))
+  }
+
+  if entries.len() > 0 {
+    if single-name != none {
+      // The only figure of its kind: no number, e.g. "(žr. lentelė)"
+      [(žr. #link(entries.first().at(0), single-name))]
+    } else {
+      let links = __sort-entries(entries).map(e => link(e.at(0), e.at(1)))
+      let name = if type(group-name) == function { group-name(entries.len()) } else { group-name }
+      [(žr. #links.join(", ") #name)]
+    }
+  }
+}
+
+/// Show rule for `@label` references. Equations render as a bare "(1.2)";
+/// figures delegate to `custom-ref`, so "(žr. 1 pav.)" is built in one place.
+/// Anything else (headings, citations, unregistered figure kinds) keeps
+/// Typst's default rendering.
+#let __format-ref(it) = {
+  let el = it.element
+  if el == none { return it }
+
+  if el.func() == math.equation {
+    let loc = el.location()
+    link(loc, "(" + __get-equation-number(loc) + ")")
+  } else if el.func() == figure and __figure-key(el) in __all-figure-kinds() {
+    custom-ref(it.target)
+  } else if el.func() == heading and __is-appendix-heading(el) {
+    custom-ref(it.target)
+  } else {
+    it
+  }
+}
+
+// ---------------------------------------------------------------------------
+// Figure layout
+// ---------------------------------------------------------------------------
+
+/// Default layout per figure kind (keyed like `__figure-kinds`; custom kinds
+/// and unlisted ones use `__FALLBACK_FIGURE_LAYOUT`).
+/// - breakable: whether the body may be split across pages. The caption is then
+///   attached to the start of the body (sticky), so it is never left alone at
+///   the bottom of a page. If `false`, body and caption form one unbreakable
+///   block that moves to the next page as a whole.
+/// - caption: `top` or `bottom`.
+#let __DEFAULT_FIGURE_LAYOUT = (
+  table: (breakable: true, caption: top),
+  raw: (breakable: true, caption: bottom),
+)
+#let __FALLBACK_FIGURE_LAYOUT = (breakable: false, caption: bottom)
+
+/// Author overrides, set via `ktu-paper(figureLayout: ...)`.
+#let __USER_FIGURE_LAYOUT = state("ktu-user-figure-layout", (:))
+
+/// Stack of local overrides set by `breakable-figures` / `unbreakable-figures`.
+#let __FIGURE_BREAK_OVERRIDE = state("ktu-figure-break-override", ())
+
+/// Validates author-supplied layouts: `(kind: (breakable: bool, caption: top | bottom))`,
+/// every field optional.
+#let __normalize-figure-layout(layouts) = {
+  for (key, spec) in layouts {
+    for (field, value) in spec {
+      assert(
+        field in ("breakable", "caption"),
+        message: "figureLayout." + key + ": unknown option `" + field + "`, expected `breakable` or `caption`",
+      )
+      if field == "breakable" {
+        assert(type(value) == bool, message: "figureLayout." + key + ".breakable must be a bool")
+      } else {
+        assert(
+          value == top or value == bottom,
+          message: "figureLayout." + key + ".caption must be `top` or `bottom`",
+        )
+      }
+    }
+  }
+  layouts
+}
+
+/// Resolves the layout of a figure kind key. Must be called in a context.
+#let __figure-layout(key) = {
+  let layout = __FALLBACK_FIGURE_LAYOUT + __DEFAULT_FIGURE_LAYOUT.at(key, default: (:))
+  layout = layout + __USER_FIGURE_LAYOUT.get().at(key, default: (:))
+  let overrides = __FIGURE_BREAK_OVERRIDE.get()
+  if overrides.len() > 0 {
+    layout.breakable = overrides.last()
+  }
+  layout
+}
+
+/// Runs `body` with every figure's `breakable` setting forced to `mode`.
+#let __with-break-override(mode, body) = {
+  __FIGURE_BREAK_OVERRIDE.update(stack => stack + (mode,))
+  body
+  __FIGURE_BREAK_OVERRIDE.update(stack => stack.slice(0, -1))
+}
+
+/// Formats a figure with a caption and number.
+#let __format-figure(it) = {
+  let caption = it.caption
+
+  // If caption is not provided, just show the figure body
+  if caption == none { return it.body }
+
+  set text(size: 11pt)
+
+  let caption-line = [*#__caption-label(it)* #caption.body]
+  let key = __figure-key(it)
+
+  context {
+    let layout = __figure-layout(key)
+    let on-top = layout.caption == top
+    // Entire table is by default left aligned, unlike other figures which are centered
+    let body = if key == "table" { align(left, it.body) } else { it.body }
+    let caption-block = block(
+      sticky: on-top and layout.breakable,
+      width: 100%,
+      align(if on-top { left } else { center }, caption-line),
+    )
+    if layout.breakable {
+      // The body may split across pages. A caption on top is sticky and stays
+      // with the first rows; a caption at the bottom cannot be glued to the end
+      // of a splittable body, so it may end up alone on the next page.
+      if on-top {
+        caption-block
+        body
+      } else {
+        body
+        caption-block
+      }
+    } else {
+      block(breakable: false, width: 100%, {
+        if on-top {
+          caption-block
+          body
+        } else {
+          body
+          caption-block
+        }
+      })
+    }
+  }
+}

src/fragments.typ

@@ -3,179 +3,231 @@
 /// Wrapper around the table function that returns a KTU style conformant table.
 /// This includes setting text size to 10 pt.
 #let ktu-table(..args) = {
-    show table: it => {
-        set text(size: 10pt)
-        // TODO: FIXME line spacing is defined differently
-        set par(leading: 1em - 0.75em) // intervalas tarp eilučių -- 1
-        it
-    }
-    table(
-        ..args
-    )
+  show table: it => {
+    set text(size: 10pt)
+    // TODO: FIXME line spacing is defined differently
+    set par(leading: 1em - 0.75em) // intervalas tarp eilučių -- 1
+    it
+  }
+  table(
+    ..args
+  )
 }
 
 #let ktu-author-table(
-    authors: (),
-    alignment: right,
+  authors: (),
+  alignment: right,
+  namesFirst: true, // if false, roles will be displayed first
 ) = context {
-    // The layout should be a list of lists whose elements are (name, role) pairs.
-    assert(authors.len() > 0, message: "author table must have at least one author")
-    assert(authors.all(it => it.len() == 2), message: "each author entry must be a pair of name and role")
+  // The layout should be a list of lists whose elements are (name, role) pairs.
+  assert(authors.len() > 0, message: "author table must have at least one author")
+  assert(authors.all(it => it.len() == 2), message: "each author entry must be a pair of name and role")
 
-    let frame(color) = (x, y) => (
-        left: 0pt,
-        right: 0pt,
-        top: if y == 0 { 0.5pt + color } else { 0pt },
-        bottom: 0.5pt + color,
-    )
-    set table(
-        inset: 5.4pt,
-        stroke: if __DEBUG_AUTHOR_TABLE.get() {
-            0.5pt + rgb("D4AF37")
-        } else {
-            frame(rgb("D4AF37"))
-        },
-    )
-    show table.cell: it => context {
-        [#it]
-        if it.body == [] {
-            v(10pt)
-        } else {
-            v(0pt)
-        }
-    }
-
-    if alignment == center {
-        align(center, table(
-            columns: (198.5pt + 56.7pt),
-            table.header([]),
-            ..for author in authors {
-                let (name, role) = author
-                (align(center)[
-                    #set block(below: 8pt)
-                    #block[*#name*]
-                    #block[#role]
-                    
-                ], [])
-            }
-        ))
+  let frame(color) = (x, y) => (
+    left: 0pt,
+    right: 0pt,
+    top: if y == 0 { 0.5pt + color } else { 0pt },
+    bottom: 0.5pt + color,
+  )
+  set table(
+    inset: 5.4pt,
+    stroke: if __DEBUG_AUTHOR_TABLE.get() {
+      0.5pt + rgb("D4AF37")
     } else {
-        align(alignment, table(
-            columns: (198.5pt, 56.7pt),
-            table.header(
-                [], [],
-            ),
-            ..for author in authors {
-                let (name, role) = author
-                (align(left)[
-                    #set block(below: 8pt)
-                    #block[*#name*]
-                    #block[#role]
-                    
-                ], [], [], [])
-            }
-        ))
+      frame(rgb("D4AF37"))
+    },
+  )
+  show table.cell: it => context {
+    [#it]
+    if it.body == [] {
+      v(10pt)
+    } else {
+      v(0pt)
     }
+  }
+
+  if alignment == center {
+    align(center, table(
+      columns: (198.5pt + 56.7pt),
+      table.header([]),
+      ..for author in authors {
+        let (name, role) = author
+        name = [*#name*]
+        if not namesFirst {
+          (role, name) = (name, role)
+        }
+        (
+          align(center)[
+            #set block(below: 8pt)
+            #block[#name]
+            #block[#role]
+
+          ],
+          [],
+        )
+      }
+    ))
+  } else {
+    align(alignment, table(
+      columns: (198.5pt, 56.7pt),
+      table.header([], []),
+      ..for author in authors {
+        let (name, role) = author
+        name = [*#name*]
+        if not namesFirst {
+          (role, name) = (name, role)
+        }
+        (
+          align(left)[
+            #set block(below: 8pt)
+            #block[#name]
+            #block[#role]
+
+          ],
+          [],
+          [],
+          [],
+        )
+      },
+    ))
+  }
 }
 
 /// This function constructs the title page header block for KTU reports. It includes the university logo, name, subheaders, the main and sub titles of the report.
-/// 
+///
 /// - bigTitle (content): The main title of the report, usually the name of the work. Displayed in 18 pt font.
 /// - subTitles (): Additional titles or information to be displayed under the main title, such as the type of work. Displayed in 14 pt font. If not provided, defaults to "Rašto darbo tipas".
 /// - subHeaders (): Additional header information to be displayed under the university name, such as the faculty. If not provided, defaults to "Fakulteto pavadinimas".
-/// -> 
+/// ->
 #let ktu-title-header-block(
-    bigTitle: highlight[Didelis pavadinimas],
-    subTitles: (),
-    subHeaders: (),
+  bigTitle: highlight[Didelis pavadinimas],
+  subTitles: (),
+  subHeaders: (),
 ) = {
-    let parsedSubtext = if subHeaders.len() > 0 {
-        subHeaders
-    } else {
-        (
-            highlight[Fakulteto pavadinimas],
-        )
+  let parsedSubtext = if subHeaders.len() > 0 {
+    subHeaders
+  } else {
+    (
+      highlight[Fakulteto pavadinimas],
+    )
+  }
+
+  let subTitles = if subTitles.len() > 0 {
+    subTitles
+  } else {
+    (
+      highlight[Rašto darbo tipas],
+    )
+  }
+
+  // Top of the title page
+  v(20pt)
+  align(center)[
+    #image("assets/ktu-logo.png", width: 2.46cm, height: 2.69cm)
+    #v(25pt)
+    #block[*Kauno technologijos universitetas*]
+    #for value in parsedSubtext {
+      block[#value]
     }
+  ]
 
-    let subTitles = if subTitles.len() > 0 {
-        subTitles
-    } else {
-        (
-            highlight[Rašto darbo tipas],
-        )
+  // The title page information
+  v(91pt)
+  align(center)[
+    #set par(justify: false)
+    #set linebreak(justify: false)
+    #block(text(size: 18pt, hyphenate: false)[*#bigTitle*])
+    #for value in subTitles {
+      block(text(size: 14pt)[#value])
     }
+  ]
+}
 
-    // Top of the title page
-    v(20pt)
-    align(center)[
-        #image("assets/ktu-logo.png", width: 2.46cm, height: 2.69cm)
-        #v(25pt)
-        #block[*Kauno technologijos universitetas*]
-        #for value in parsedSubtext {
-            block[#value]
-        }
-    ]
-
-    // The title page information
-    v(91pt)
-    align(center)[
-        #set par(justify: false)
-        #set linebreak(justify: false)
-        #block(text(size: 18pt, hyphenate: false)[*#bigTitle*])
-        #for value in subTitles {
-            block(text(size: 14pt)[#value])
-        }
-    ]
+#let ktu-heading-page(
+  faculty: highlight[Fakulteto pavadinimas],
+  department: none, // optional
+  title: highlight[Rašto darbo pavadinimas],
+  subtitles: highlight[Praktikos ataskaita / referatas ir pan. (įrašyti rašto darbo tipą)],
+  authors: (
+    (highlight[Vardenis Pavardenis], highlight[Projekto autorius]),
+    (highlight[Vardenis Pavardenis], highlight[Vadovas]),
+  ),
+  place: highlight[Kaunas],
+  year: highlight[#datetime.today().year()],
+  centerAuthors: false,
+  authorNamesFirst: true, // if false, roles will be displayed first
+) = {
+  let subHeaders = (faculty,)
+  if department != none {
+    subHeaders = (faculty, department)
+  }
+  if type(subtitles) != array {
+    subtitles = (subtitles,)
+  }
+  ktu-title-header-block(
+    subHeaders: subHeaders,
+    bigTitle: title,
+    subTitles: subtitles,
+  )
+  v(94pt)
+  if centerAuthors {
+    ktu-author-table(authors: authors, namesFirst: authorNamesFirst, alignment: center)
+  } else {
+    ktu-author-table(authors: authors, namesFirst: authorNamesFirst)
+  }
+  align(center + bottom, block([*#place, #year*]))
 }
 
 #let ktu-heading-page-centered(
-    faculty: highlight[Fakulteto pavadinimas],
-    title: highlight[Rašto darbo pavadinimas],
-    subtitles: highlight[Praktikos ataskaita / referatas ir pan. (įrašyti rašto darbo tipą)],
-    authors: (
-        (highlight[Vardenis Pavardenis], highlight[Projekto autorius]),
-        (highlight[Vardenis Pavardenis], highlight[Vadovas]),
-    ),
-    place: highlight[Kaunas],
-    year: highlight[#datetime.today().year()],
+  faculty: highlight[Fakulteto pavadinimas],
+  department: none, // optional
+  title: highlight[Rašto darbo pavadinimas],
+  subtitles: highlight[Praktikos ataskaita / referatas ir pan. (įrašyti rašto darbo tipą)],
+  authors: (
+    (highlight[Vardenis Pavardenis], highlight[Projekto autorius]),
+    (highlight[Vardenis Pavardenis], highlight[Vadovas]),
+  ),
+  authorNamesFirst: true, // if false, roles will be displayed first
+  place: highlight[Kaunas],
+  year: highlight[#datetime.today().year()],
 ) = {
-    let isArr = type(subtitles) == array
-    if not isArr {
-        subtitles = (subtitles,)
-    }
-    ktu-title-header-block(
-        subHeaders: (faculty,),
-        bigTitle: title,
-        subTitles: subtitles,
-    )
-    v(94pt)
-    ktu-author-table(authors: authors, alignment: center)
-    align(center+bottom, block([*#place, #year*]))
+  ktu-heading-page(
+    faculty: faculty,
+    department: department,
+    title: title,
+    subtitles: subtitles,
+    authors: authors,
+    place: place,
+    year: year,
+    centerAuthors: true,
+    authorNamesFirst: authorNamesFirst,
+  )
 }
 
 #let ktu-heading-page-normal(
-    faculty: highlight[Fakulteto pavadinimas],
-    title: highlight[Rašto darbo pavadinimas],
-    subtitles: highlight[Praktikos ataskaita / referatas ir pan. (įrašyti rašto darbo tipą)],
-    authors: (
-        (highlight[Vardenis Pavardenis], highlight[Projekto autorius]),
-        (highlight[Vardenis Pavardenis], highlight[Vadovas]),
-    ),
-    place: highlight[Kaunas],
-    year: highlight[#datetime.today().year()],
+  faculty: highlight[Fakulteto pavadinimas],
+  department: none, // optional
+  title: highlight[Rašto darbo pavadinimas],
+  subtitles: highlight[Praktikos ataskaita / referatas ir pan. (įrašyti rašto darbo tipą)],
+  authors: (
+    (highlight[Vardenis Pavardenis], highlight[Projekto autorius]),
+    (highlight[Vardenis Pavardenis], highlight[Vadovas]),
+  ),
+  authorNamesFirst: true, // if false, roles will be displayed first
+  place: highlight[Kaunas],
+  year: highlight[#datetime.today().year()],
 ) = {
-    let isArr = type(subtitles) == array
-    if not isArr {
-        subtitles = (subtitles,)
-    }
-    ktu-title-header-block(
-        subHeaders: (faculty,),
-        bigTitle: title,
-        subTitles: subtitles,
-    )
-    v(94pt)
-    ktu-author-table(authors: authors)
-    align(center+bottom, block([*#place, #year*]))
+  ktu-heading-page(
+    faculty: faculty,
+    department: department,
+    title: title,
+    subtitles: subtitles,
+    authors: authors,
+    place: place,
+    year: year,
+    centerAuthors: false,
+    authorNamesFirst: authorNamesFirst,
+  )
 }
 
 #let ktu-academic-honestly-declaration-page(
@@ -183,22 +235,144 @@
   author: highlight[Vardenis Pavardenis],
   projectTitle: highlight[Projekto pavadinimas],
 ) = {
-    ktu-title-header-block(
-        subHeaders: (faculty, author),
-        bigTitle: projectTitle,
-        subTitles: ("Akademinio sąžiningumo deklaracija",) 
+  ktu-title-header-block(
+    subHeaders: (faculty, author),
+    bigTitle: projectTitle,
+    subTitles: ("Akademinio sąžiningumo deklaracija",),
+  )
+  v(20pt)
+  [
+    Patvirtinu, kad:
+    + baigiamąjį projektą parengiau savarankiškai ir sąžiningai, nepažeisdama(s) kitų asmenų autoriaus ar kitų teisių, laikydamasi(s) Lietuvos Respublikos autorių teisių ir gretutinių teisių įstatymo nuostatų, Kauno technologijos universiteto (toliau -- Universitetas) intelektinės nuosavybės valdymo ir perdavimo nuostatų bei Universiteto akademinės etikos kodekse nustatytų etikos reikalavimų;
+    + baigiamajame projekte visi pateikti duomenys ir tyrimų rezultatai yra teisingi ir gauti teisėtai, nei viena šio projekto dalis nėra plagijuota nuo jokių spausdintinių ar elektroninių šaltinių, visos baigiamojo projekto tekste pateiktos citatos ir nuorodos yra nurodytos literatūros sąraše;
+    + įstatymų nenumatytų piniginių sumų už baigiamąjį projektą ar jo dalis niekam nesu mokėjęs (-usi);
+    + suprantu, kad išaiškėjus nesąžiningumo ar kitų asmenų teisių pažeidimo faktui, man bus taikomos akademinės nuobaudos pagal Universitete galiojančią tvarką ir būsiu pašalinta(s) iš Universiteto, o baigiamasis projektas gali būti pateiktas Akademinės etikos ir procedūrų kontrolieriaus tarnybai nagrinėjant galimą akademinės etikos pažeidimą.
+
+    #v(10pt)
+    #h(58%) #author
+
+    #h(58%) _Patvirtinta elektroniniu būdu_
+  ]
+}
+
+#let ktu-gen-ai-usage-declaration-page(
+  author: highlight[Vardenis Pavardenis],
+  faculty: highlight[Informatikos fakultetas],
+  module: highlight[Studijų modulio pavadinimas (kodas)],
+  title: highlight[Studijų darbo pavadinimas],
+  type: highlight[Studijų darbo rūšis],
+  usageInformation: (
+    (highlight[...], highlight[...], highlight[...], highlight[...]),
+  ),
+  showPhysicalSignature: true,
+) = {
+  set text(size: 12pt)
+
+  align(center)[
+    #block([*GENERATYVINIO DIRBTINIO INTELEKTO (GenDI) NAUDOJIMO DEKLARACIJA*])
+    #block[\_\_\_ \_\_\_ \_\_\_]
+  ]
+
+  [*1. Studento duomenys*]
+  table(
+    columns: (155pt, 1fr),
+    align: (x, y) => { horizon + left },
+    [*Studento vardas, pavardė*], [#author],
+    [*Studento fakultetas*], [#faculty],
+    [*Studijų modulis*], [#module],
+    [*Studijų darbo pavadinimas*], [#title],
+    [*Studijų darbo rūšis*], [#type],
+  )
+
+  [
+    #set linebreak(justify: false)
+    *2. GenDI naudojimo patvirtinimas*\
+    _Pažymėkite vieną variantą:_
+  ]
+  let usedAi = usageInformation != none and usageInformation.len() > 0
+  let checkbox(checked: false) = {
+    box(
+      width: 0.8em,
+      height: 0.8em,
+      stroke: 0.08em + black,
+      radius: 0.15em,
+      if checked {
+        let size = 0.4em
+        let margin = 0.2em
+        // Top-left to bottom-right line
+        place(top + left, dx: margin, dy: margin, line(end: (size, size), stroke: 0.08em + black))
+        // Bottom-left to top-right line
+        place(top + left, dx: margin, dy: margin + size, line(end: (size, -size), stroke: 0.08em + black))
+      } else {
+        none
+      },
     )
-    v(20pt)
-    [
-        Patvirtinu, kad:
-        + baigiamąjį projektą parengiau savarankiškai ir sąžiningai, nepažeisdama(s) kitų asmenų autoriaus ar kitų teisių, laikydamasi(s) Lietuvos Respublikos autorių teisių ir gretutinių teisių įstatymo nuostatų, Kauno technologijos universiteto (toliau -- Universitetas) intelektinės nuosavybės valdymo ir perdavimo nuostatų bei Universiteto akademinės etikos kodekse nustatytų etikos reikalavimų;
-        + baigiamajame projekte visi pateikti duomenys ir tyrimų rezultatai yra teisingi ir gauti teisėtai, nei viena šio projekto dalis nėra plagijuota nuo jokių spausdintinių ar elektroninių šaltinių, visos baigiamojo projekto tekste pateiktos citatos ir nuorodos yra nurodytos literatūros sąraše;
-        + įstatymų nenumatytų piniginių sumų už baigiamąjį projektą ar jo dalis niekam nesu mokėjęs (-usi);
-        + suprantu, kad išaiškėjus nesąžiningumo ar kitų asmenų teisių pažeidimo faktui, man bus taikomos akademinės nuobaudos pagal Universitete galiojančią tvarką ir būsiu pašalinta(s) iš Universiteto, o baigiamasis projektas gali būti pateiktas Akademinės etikos ir procedūrų kontrolieriaus tarnybai nagrinėjant galimą akademinės etikos pažeidimą.
+  }
+  table(
+    columns: (28pt, 1fr),
+    align: (x, y) => { horizon + left },
+    table.cell(rowspan: 2)[#align(top, checkbox(checked: not usedAi))],
+    [*Rengdamas (-a) šį studijų darbą nenaudojau generatyvinio dirbtinio intelekto įrankių*],
+    [Patvirtinu, kad studijų darbe pateiktas turinys yra mano autentiškas intelektinis darbas, o naudoti šaltiniai nurodyti pagal citavimo reikalavimus.],
 
-        #v(10pt)
-        #h(58%) #author
+    table.cell(rowspan: 2)[#align(top, checkbox(checked: usedAi))],
+    [*Rengdamas (-a) šį studijų darbą naudojau generatyvinio dirbtinio intelekto įrankius*],
+    [Patvirtinu, kad GenDI įrankiai buvo naudojami laikantis studijų modulyje nustatytų GenDI naudojimo reikalavimų bei naudojimas yra skaidriai ir sąžiningai deklaruotas.],
+  )
 
-        #h(58%) _Patvirtinta elektroniniu būdu_
-    ]
-}
+  [
+    #set linebreak(justify: false)
+    *3.	GenDI naudojimo informacija*\
+    _Užpildykite, jei rengiant studijų darbą naudojote generatyvinio dirbtinio intelekto įrankius:_
+  ]
+  let rows = if usedAi {
+    usageInformation.flatten()
+  } else {
+    // hide[x] gives each empty cell the height of one regular line of text
+    range(3).map(_ => range(4).map(_ => hide[x])).flatten()
+  }
+  set par(justify: false)
+  table(
+    columns: (91pt, 127pt, 139pt, 1fr),
+    align: (x, y) => if y == 0 { top + left } else { horizon + left },
+    table.header(
+      [
+        #set linebreak(justify: false)
+        *Darbo dalis*\
+        _(pvz., skyrius, visas darbas)_
+      ],
+      [*GenDI įrankio naudojimo tikslas*],
+      [*GenDI įrankio pavadinimas, versija / internetinė nuoroda*],
+      [
+        #set linebreak(justify: false)
+        *Studento indėlis* \
+        _(kaip GenDI rezultatas buvo patikrintas, redaguotas ar papildytas studento)_
+      ],
+    ),
+    ..rows,
+  )
+
+  let field(size: 12pt, body) = {
+    set text(size: size)
+    align(center, body)
+  }
+  let underlined-field(min-width: 92pt, body) = context {
+    let w = calc.max(min-width, measure(body).width)
+    align(center, box(
+      width: w,
+      height: 1.4em,
+      stroke: (bottom: 0.5pt + black),
+      inset: (bottom: 2pt),
+      align(center + bottom, body),
+    ))
+  }
+  let maybe(show-it, body) = if show-it { body } else { hide(body) }
+  align(bottom, table(
+    stroke: 0pt,
+    inset: 2pt,
+    columns: (120pt, 177pt, 1fr),
+    align: (x, y) => { horizon + left },
+    [Studentas], [#maybe(showPhysicalSignature, [#underlined-field[]])], [#underlined-field[#author]],
+    [], [#maybe(showPhysicalSignature, [#field(size: 10pt)[_(parašas)_]])], [#field(size: 10pt)[(_vardas, pavardė_)]],
+  ))
+}

template/ataskaita.typ

@@ -0,0 +1,171 @@
+#import "@local/ktu-paper:0.5.1": (
+  ktu-paper,
+  ktu-table-of-contents, ktu-picture-list, ktu-table-list, ktu-code-list,
+  ktu-heading-page-normal,
+  ktu-gen-ai-usage-declaration-page,
+  ktu-table,
+  unnumbered-heading,
+  custom-ref, ref-no
+)
+
+#show: ktu-paper.with(
+  font: "Times New Roman", // or Arial
+  figureNumberingPerSection: true,
+  figureKinds: (
+    veryCustomKind: (supplement: "komanda", ref-name: "komanda"),
+  ),
+  // Code blocks, `code: none` to disable styling
+  code: (
+    font: "Hack",
+    spacing: 80%,
+    fill: white,
+    stroke: 0.5pt + black,
+    numbers: true,
+    radius: 0pt,
+    display-name: false,
+    display-icon: false,
+  ),
+)
+
+// Replace dots in equations with commas instead so 1.25 becomes 1,25.
+#show math.equation: it => {
+  show regex("\d+\.\d+"): it => {show ".": {","+h(0pt)}
+    it}
+  it
+}
+
+// To be used for writing purposes to mark TODOs in the document. They will be highlighted in yellow and have a dashed border.
+#let todo(desc) = block(
+  width: 100%, inset: 10pt, stroke: (dash: "dashed"), fill: yellow.lighten(80%),
+  [*TODO:* #desc],
+)
+
+#ktu-heading-page-normal(
+  faculty: highlight[Informatikos fakultetas],
+  title: highlight[Laboratorinio darbo ataskaitos pavadinimas],
+  subtitles: (
+    "Laboratorinio darbo ataskaita",
+    highlight[Studijų modulio pavadinimas (kodas)]
+  ),
+  authors: (
+    (highlight[Vardenis Pavardenis], "Ataskaitą parengė"),
+    (highlight[Pareigų ir mokslo laipsnio sutrumpinimas Vardenis Pavardenis], "Laboratoriniam darbui vadovavo"),
+  ),
+  authorNamesFirst: false,
+  place: "Kaunas",
+  year: datetime.today().year(),
+)
+#pagebreak()
+#set page(numbering: "1")
+
+#ktu-table-of-contents()
+#pagebreak()
+
+#ktu-picture-list()
+#pagebreak()
+
+#ktu-table-list()
+#pagebreak()
+
+#ktu-code-list()
+#pagebreak()
+
+#unnumbered-heading[= Įvadas]
+#lorem(50)
+
+#pagebreak()
+= Skyrius
+#lorem(50)
+
+== Poskyrius
+#lorem(50)
+
+=== Dalis
+#lorem(50)
+
+#pagebreak()
+= Komponentai
+
+== Paveikslai
+Galima gauti paveikslo numerį #ref-no(<image-label>) arba visą paveikslo nuorodą #custom-ref(<image-label>).
+
+#figure(
+  image("images/santaka.png", width: 70%),
+  caption: [
+    Paveikslo pavadinimas
+  ],
+) <image-label>
+
+
+== Paveikslų "grid" išdėstymas
+Paveikslus taip pat galima sudėti į "grid" išdėstymą, į jį kreiptis kaip numerį #ref-no(<image-grid-label>) arba visą nuorodą #custom-ref(<image-grid-label>).
+
+#figure(grid(
+  columns: 2,
+  gutter: 2mm,
+  image("images/santaka.png", width: 100%),
+  image("images/santaka.png", width: 100%),
+), caption: [
+  Paveikslėliai "grid'e"
+]) <image-grid-label>
+
+
+== Lentelės
+
+Galima gauti lentelės numerį /*#ref-no(<table-label>)*/ arba visą lentelės nuorodą #custom-ref(<table-label>).
+
+#figure(
+  ktu-table(
+    columns: (auto, 1fr, 1fr, 1fr),
+    align: (x, y) => { horizon + left },
+    table.header([*Stulpelio pavadinimas*], [*Stulpelio pavadinimas*], [*Stulpelio pavadinimas*], [*Stulpelio pavadinimas*]),
+    [Eilutė 1], [...], [...], [...],
+    [Eilutė 2], [...], [...], [...],
+    [Eilutė 3], [...], [...], [...],
+    [Eilutė 4], [...], [...], [...],
+  ),
+  caption: [Lentelės pavadinimas],
+) <table-label>
+
+
+== Formulės
+Formules galima išreikšti eilutėje, pavyzdžiui $E = m c^2$ arba atskiroje eilutėje, pavyzdžiui:
+$
+  E = m c^2
+$ <formula-label>
+
+// TODO: fix
+Formulės atskiroje eilutėje numeruojamos besąlygiškai, galima gauti formulės numerį #ref-no(<formula-label>) arba visą formulės nuorodą #custom-ref(<formula-label>).
+
+== Kodo fragmentai
+Kodo fragmentus galima išreikšti eilutėje, pavyzdžiui `print("Hello, world!")` arba atskiroje eilutėje, pavyzdžiui:
+#figure(```python
+def main():
+  print("Hello, world!")
+if __name__ == "__main__":
+  main()
+```, caption: [
+  Python kodas
+]) <code-label>
+
+Galima gauti kodo fragmento numerį #ref-no(<code-label>) arba visą kodo fragmento nuorodą #custom-ref(<code-label>).
+
+== Naudotojo apibrėžtos figūros
+
+Naudotojai tai pat gali apibrėžti savo figūras, pavyzdžiui, komandų fragmentus. Pavyzdžiui, galima apibrėžti komandų fragmentą su papildoma informacija ir naudoti jį dokumente. Galima gauti kodo fragmento numerį #ref-no(<custom-figure-label>) arba visą kodo fragmento nuorodą #custom-ref(<custom-figure-label>).
+
+#figure(
+  ```sh
+  npm install foo
+  ```,
+  kind: "veryCustomKind",
+  supplement: "...",
+  caption: [Diegimo komanda],
+) <custom-figure-label>
+
+#pagebreak()
+= Išvados
+#lorem(50)
+
+#pagebreak()
+#ktu-gen-ai-usage-declaration-page()

template/main.typ

@@ -1,13 +1,14 @@
-#import "@local/ktu-paper:0.1.0": (
-  setup-page, setup-code, 
+#import "@local/ktu-paper:0.5.1": (
+  ktu-paper,
   ktu-table-of-contents, ktu-picture-list, ktu-table-list,
   ktu-heading-page-normal,
   ktu-table,
   custom-ref, ref-no
 )
 
-#show: setup-page.with()
-#show: setup-code.with()
+#show: ktu-paper.with(
+  font: "Times New Roman",
+)
 
 #show math.equation: it => {
     show regex("\d+\.\d+"): it => {show ".": {","+h(0pt)}
@@ -92,7 +93,7 @@ show table.cell: set text(size: 8pt)
 Duomenų sklaidą yra patogu pavaizduoti ir stačiakampe diagrama:
 
 #figure(
-  image("image.jpeg", width: 70%),
+  image("images/santaka.png", width: 70%),
   caption: [
     Skaitinių atributų stačiakampė diagrama
   ],
@@ -134,8 +135,8 @@ Paveikslėlius galima grupuoti į "grid" #custom-ref(<image-grid-2>, <image-grid
 #figure(grid(
   columns: 2,
   gutter: 2mm,
-  image("image.jpeg", width: 100%),
-  image("image.jpeg", width: 100%),
+  image("images/santaka.png", width: 100%),
+  image("images/santaka.png", width: 100%),
 ), caption: [
   Paveikslėliai "grid'e" 1
 ]) <image-grid-2>
@@ -143,11 +144,11 @@ Paveikslėlius galima grupuoti į "grid" #custom-ref(<image-grid-2>, <image-grid
 #figure(grid(
   columns: 3,
   gutter: 2mm,
-  image("image.jpeg", width: 100%),
-  image("image.jpeg", width: 100%),
-  image("image.jpeg", width: 100%),
-  image("image.jpeg", width: 100%),
-  image("image.jpeg", width: 100%),
+  image("images/santaka.png", width: 100%),
+  image("images/santaka.png", width: 100%),
+  image("images/santaka.png", width: 100%),
+  image("images/santaka.png", width: 100%),
+  image("images/santaka.png", width: 100%),
 ), caption: [
   Paveikslėliai "grid'e" 2
 ]) <image-grid-3>
@@ -188,7 +189,7 @@ $
 čia $X$ -- imtis, $mu$ -- imties vidurkis, $sigma$ -- imties standartinis nuokrypis. Fragmentas pateikiamas #ref-no(<image-1>) paveikslėlyje.
 
 #figure(
-  image("image.jpeg", width: 90%),
+  image("images/santaka.png", width: 90%),
   caption: [
     Paveikslėlio pavadinimas
   ],

template/test.typ

@@ -1,5 +1,5 @@
-#import "@local/ktu-paper:0.1.0": (
-  setup-page, setup-code, 
+#import "@local/ktu-paper:0.5.1": (
+  ktu-paper,
   ktu-table-of-contents, ktu-picture-list, ktu-table-list,
   ktu-heading-page-normal,
   ktu-table,
@@ -7,8 +7,9 @@
   custom-ref, ref-no
 )
 
-#show: setup-page.with()
-#show: setup-code.with()
+#show: ktu-paper.with(
+  font: "Times New Roman",
+)
 
 #show figure: it => {
   set block(breakable: true)
@@ -189,7 +190,7 @@ Eu eum decore inimicus consetetur, cu usu habeo corpora intellegam. Ut antiopam
 Lorem ipsum dolor sit amet, eam ex decore persequeris, sit at illud lobortis atomorum. Sed dolorem quaerendum ne, prompta instructior ne pri. Et mel partiendo suscipiantur, docendi abhorreant ea sit. Recteque imperdiet eum te.
 
 #figure(
-  image("Picture.png", width: 11.2cm, height: 8cm),
+  image("images/santaka.png", width: 11.2cm, height: 8cm),
   caption: [
     Kauno technologijos universiteto „Santakos“ slėnio fasadas
   ],

test-regression.sh

@@ -0,0 +1,43 @@
+#!/bin/bash
+
+# Clean up previous test results
+if [ -d "tests/original-res" ]; then
+    rm -r tests/original-res
+fi
+if [ -d "tests/modified-res" ]; then
+    rm -r tests/modified-res
+fi
+if [ -d "tests/modified" ]; then
+    rm -r tests/modified
+fi
+if [ -d "tests/original/src" ]; then
+    rm -r tests/original/src
+fi
+
+mkdir -p tests/original-res
+mkdir -p tests/modified-res
+
+# Copy current template
+cp -r src/ tests/original/src
+
+cp -r tests/original tests/modified
+# replace the "#import "@local/ktu-paper:0.1.0"" 
+# with "#import "./src/lib.typ"" in the modified files
+find tests/modified -type f -name "*.typ" -exec \
+    sed -i 's/#import "@local\/ktu-paper:0.1.0"/#import ".\/src\/lib.typ"/g' {} \;
+find tests/modified -type f -name "ataskaita.typ" -exec \
+    sed -i 's/setup-page/ktu-paper/g' {} \;
+
+# Compile the original document
+typst compile --root tests/original tests/original/ataskaita.typ "tests/original-res/{0p}.png"
+# Compile the modified document
+typst compile --root tests/modified tests/modified/ataskaita.typ "tests/modified-res/{0p}.png"
+typst compile --root tests/modified tests/modified/ataskaita.typ "tests/modified.pdf"
+
+# Compare the results
+diff -r tests/original-res tests/modified-res
+if [ $? -eq 0 ]; then
+    echo "No differences found between original and modified results."
+else
+    echo "Differences found between original and modified results."
+fi

typst.toml

@@ -1,9 +1,9 @@
 [package]
 name = "ktu-paper"
-version = "0.1.0"
-compiler = "0.12.0"
+version = "0.5.1"
+compiler = "0.15.0"
 entrypoint = "src/lib.typ"
-repository = "https://git.svetikas.lt/JustAnyone/dotfiles"
+repository = "https://github.com/svetikas/ktu-paper"
 authors = ["Dominykas Svetikas <https://svetikas.lt>"]
 license = "MIT"
 description = "KTU report template to use for writing lab reports or final thesis."