chore: bump version to 0.5.0

Resolves #1 and #2

README.md

@@ -1,12 +1,14 @@
 # ktu-paper
 
-This repository contains a Typst template for academic papers at the Kaunas University of Technology, Faculty of Informatics. A final Bachelor's thesis written with this template has successfully passed the formal review.
+This repository contains a Typst template for academic papers at the Kaunas University of Technology, Faculty of Informatics.
+
+I successfully wrote and defended a final Bachelor's thesis written with this template and continue to use for writing other reports.
 
 ## Initiating the template
 Install the downloaded template under the following directory:
-- Linux: `~/.local/share/typst/packages/local/ktu-paper/0.4.1/`
+- Linux: `~/.local/share/typst/packages/local/ktu-paper/0.5.0/`
 
 And then initiate a new project:
 ```sh
-typst init @local/ktu-paper:0.4.1
+typst init @local/ktu-paper:0.5.0
 ```

src/figures.typ

@@ -7,7 +7,9 @@
 
 /// Localizations for the recognized referenceable figure kinds, keyed by `repr(func)`.
 /// - supplement: used in captions (the caption adds the separator, e.g. "1 pav.").
-/// - ref-name: used in references, e.g. "(žr. 1 pav.)".
+/// - ref-name: used in references, e.g. "(žr. 1 pav.)". Either a string or a
+///   function `count => string`, called with the number of elements mentioned
+///   together, e.g. "(žr. 1 priedą)" vs "(žr. 1, 2 priedus)".
 /// - single-name: full word used when the figure is the only one of its kind and
 ///   therefore unnumbered, e.g. "Paveikslas. ..." and "(žr. paveikslas)".
 #let __figure-kinds = (
@@ -15,6 +17,12 @@
   image: (supplement: "pav", ref-name: "pav.", single-name: "paveikslas"),
   raw: (supplement: "kodo frag", ref-name: "kodo frag.", single-name: "kodo fragmentas"),
   equation: (supplement: "lygtis", ref-name: "formulė", single-name: "lygtis"),
+  // Appendices are headings, not figures, but they use the same referencing
+  appendix: (
+    supplement: "priedas",
+    ref-name: count => if count == 1 { "priedą" } else { "priedus" },
+    single-name: "priedas",
+  ),
 )
 
 /// Figure kinds registered by the document author via `ktu-paper(figureKinds: ...)`.
@@ -160,10 +168,32 @@
 }
 
 /// Appendix headings carry an "appendix-heading" metadata marker as their
-/// first child and are numbered differently from normal headings.
+/// first child (or as their whole body, when the appendix has no title) and
+/// are numbered separately from normal headings.
 #let __is-appendix-heading(item) = {
   let body = item.body
-  body.has("children") and body.children.at(0, default: none) == metadata("appendix-heading")
+  if body.has("children") {
+    body.children.at(0, default: none) == metadata("appendix-heading")
+  } else {
+    body == metadata("appendix-heading")
+  }
+}
+
+/// Returns the title of an appendix heading element (everything after the
+/// marker), or `none` if the appendix has no title.
+#let __appendix-title(item) = {
+  let body = item.body
+  if not body.has("children") { return none }
+  let rest = body.children.slice(1)
+  if rest.len() == 0 { none } else { rest.join() }
+}
+
+/// Returns the number (int) of an appendix heading element: its position among
+/// all appendices, in document order. Must be called in a context.
+#let __appendix-number(item) = {
+  query(selector(heading).before(item.location(), inclusive: true))
+    .filter(h => __is-appendix-heading(h))
+    .len()
 }
 
 /// Parses a dotted number such as "12" or "1.12.5" into an array of ints.
@@ -245,20 +275,24 @@
   let number = if kind == figure {
     if __is-single-unnumbered(item) {
       panic(
-        "ref-no: " + str(target) + " is the only " + __figure-key(item)
+        "ref-no: "
+          + str(target)
+          + " is the only "
+          + __figure-key(item)
           + " in the document and is therefore unnumbered; "
-          + "refer to it with @" + str(target) + " (or custom-ref) instead",
+          + "refer to it with @"
+          + str(target)
+          + " (or custom-ref) instead",
       )
     }
     __get-figure-number(item, loc)
   } else if kind == math.equation {
     "(" + __get-equation-number(loc) + ")"
   } else if kind == heading {
-    let numbers = counter(heading).at(loc)
     if __is-appendix-heading(item) {
-      str(numbers.at(1))
+      str(__appendix-number(item))
     } else {
-      numbers.map(str).join(".")
+      counter(heading).at(loc).map(str).join(".")
     }
   } else {
     panic("referencing unknown type: " + repr(kind))
@@ -270,7 +304,8 @@
 /// Create a custom reference for multiple targets of the same type.
 /// - targets (label...): Labels to create a custom reference for.
 #let custom-ref(..targets) = context {
-  let group-name = none
+  let group-key = none
+  let group-name = none // a string, or a function of the number of mentions
   let single-name = none // set when the target is a lone, unnumbered figure
   let entries = () // (location, number) pairs
 
@@ -278,8 +313,9 @@
     let item = query(target).first()
     let loc = item.location()
 
-    let (name, number) = if item.func() == math.equation {
-      (__figure-kinds.equation.ref-name, __get-equation-number(loc))
+    // (kind key used for grouping, ref-name spec, number)
+    let (key, name, number) = if item.func() == math.equation {
+      ("equation", __figure-kinds.equation.ref-name, __get-equation-number(loc))
     } else if item.func() == figure {
       let kind = __figure-key(item)
       let kinds = __all-figure-kinds()
@@ -287,14 +323,17 @@
         panic("unregistered figure kind `" + kind + "`: register it with ktu-paper(figureKinds: ...)")
       }
       if __is-single-unnumbered(item) { single-name = kinds.at(kind).single-name }
-      (kinds.at(kind).ref-name, __get-figure-number(item, loc))
+      (kind, kinds.at(kind).ref-name, __get-figure-number(item, loc))
+    } else if item.func() == heading and __is-appendix-heading(item) {
+      ("appendix", __figure-kinds.appendix.ref-name, str(__appendix-number(item)))
     } else {
       panic("referencing unknown type: " + repr(item.func()))
     }
 
-    if group-name != none and group-name != name {
+    if group-key != none and group-key != key {
       panic("custom-ref does not support grouping different elements together")
     }
+    group-key = key
     group-name = name
     entries.push((loc, number))
   }
@@ -305,7 +344,8 @@
       [(žr. #link(entries.first().at(0), single-name))]
     } else {
       let links = __sort-entries(entries).map(e => link(e.at(0), e.at(1)))
-      [(žr. #links.join(", ") #group-name)]
+      let name = if type(group-name) == function { group-name(entries.len()) } else { group-name }
+      [(žr. #links.join(", ") #name)]
     }
   }
 }
@@ -323,6 +363,8 @@
     link(loc, "(" + __get-equation-number(loc) + ")")
   } else if el.func() == figure and __figure-key(el) in __all-figure-kinds() {
     custom-ref(it.target)
+  } else if el.func() == heading and __is-appendix-heading(el) {
+    custom-ref(it.target)
   } else {
     it
   }

src/lib.typ

@@ -1,4 +1,4 @@
-#import "@preview/codly:1.3.0": codly, codly-init
+#import "@preview/codly:2.0.0" as codly
 #import "config.typ": debug-author-table, enable-heading-experiment, __HEADING_EXPERIMENT, __FIG_PER_SECTION, __UPPERCASE_SECTION_TITLES
 #import "fragments.typ": (
   ktu-table,
@@ -20,6 +20,11 @@
 
   __format-ref,
   __format-figure,
+  __figure-kinds,
+
+  __is-appendix-heading,
+  __appendix-title,
+  __appendix-number,
 )
 
 /**
@@ -53,11 +58,30 @@
   heading(level: level, numbering: none, body)
 }
 
-#let appendix-item(body) = {
+/// Insert an appendix (priedas).
+///
+/// Appendices are numbered 1, 2, 3, ... in the order they appear in the
+/// document, so place them in the order they are first mentioned in the text.
+/// Each appendix should start on a new page: put a `#pagebreak()` before it.
+/// "N priedas" is written in the top right
+/// corner. The optional title is written below it like a chapter title (bold),
+/// exactly as given: start it with a capital letter, the rest in lowercase.
+/// Appendices are included in the table of contents.
+///
+/// Give it a label to refer to it from the text: `#appendix-item[Pavadinimas] <pr-konfig>`
+/// and then `@pr-konfig` or `#custom-ref(<pr-konfig>)` gives "(žr. 1 priedą)".
+/// - title (content | none): Optional appendix title.
+/// -> heading
+#let appendix-item(..title) = {
+  assert(
+    title.named().len() == 0 and title.pos().len() <= 1,
+    message: "appendix-item takes at most one argument: the appendix title",
+  )
+  let title = title.pos().at(0, default: none)
   heading(
-    metadata("appendix-heading") + "priedas. " + body,
+    if title == none { metadata("appendix-heading") } else { metadata("appendix-heading") + title },
     level: 2,
-    numbering: (..any) => {str(any.at(1))}
+    numbering: none,
   )
 }
 
@@ -116,18 +140,25 @@
       show outline.entry: it => {
         // Recompute the gap based on the prefix content, so that the outline entry is indented
         // from the left regardless of the length of the prefix (based on the requirement)
-        let prefixContent = it.prefix()
-        let measurement = measure(prefixContent)
-        let target = targets.at(it.level - 1, default: 0.64cm)
-        let newGap = target - measurement.width
-        if it.element.body.has("children") and it.element.body.children.at(0) == metadata("appendix-heading") {
-          target = 0.64cm
+        let isAppendix = __is-appendix-heading(it.element)
+
+        // Appendices are listed as "N priedas. Pavadinimas", the number being the prefix
+        let prefixContent = if isAppendix {
+          context [#__appendix-number(it.element)]
+        } else {
+          it.prefix()
         }
+        let measurement = measure(prefixContent)
+        let target = if isAppendix { 0.64cm } else { targets.at(it.level - 1, default: 0.64cm) }
         let newGap = target - measurement.width
 
         // Uppercase body if need be
         let bodyContent = it.element.body
-        if isUpper and (it.level == 1 or it.element.numbering == none) {
+        if isAppendix {
+          let title = __appendix-title(it.element)
+          let name = __figure-kinds.appendix.supplement
+          bodyContent = if title == none { [#name] } else { [#name. #title] }
+        } else if isUpper and (it.level == 1 or it.element.numbering == none) {
           bodyContent = upper(bodyContent)
         }
 
@@ -255,16 +286,41 @@
   __ktu_outline(title: heading(title, outlined: true), target: figure.where(kind: kind))
 }
 
-#let setup-code(body) = {
-  show: codly-init.with()
-  codly(
-    fill: white,
-    zebra-fill: none,
-    stroke: none,
-    display-name: false,
-    display-icon: false,
+/// `code` option defaults for the library entrypoint.
+#let __CODE_DEFAULTS = (
+  font: "Hack",
+  spacing: 80%,
+  fill: white,
+  stroke: 0.5pt + black,
+  numbers: true,
+  display-name: false,
+  display-icon: false,
+)
+
+/// Applies the code block styling to the body.
+/// - code (dictionary | none): Options, merged over `__CODE_DEFAULTS`.
+///   `none` leaves raw blocks untouched.
+#let __setup-code(code, body) = {
+  if code == none {
+    return body
+  }
+  let opts = __CODE_DEFAULTS + code
+  let known = __CODE_DEFAULTS.keys()
+  for key in opts.keys() {
+    assert(
+      key in known,
+      message: "ktu-paper: unknown `code` option \"" + key + "\", expected one of: " + known.join(", "),
+    )
+  }
+
+  show raw.where(block: true): codly.new
+  show: codly.set_(number-enabled: opts.numbers)
+  show: codly.line-set_(fill: opts.fill, stroke: opts.stroke)
+  show: codly.lang-set_(
+    display-name: opts.display-name,
+    display-icon: opts.display-icon,
   )
-  show raw: set text(font: "Hack", spacing: 80%)
+  show raw: set text(font: opts.font, spacing: opts.spacing)
   body
 }
 
@@ -318,6 +374,8 @@
   body
 }
 
+#let setup-code(body, ..ignored) = body
+
 #let setup-page(
   font: "Times New Roman",
   uppercaseSectionTitles: false,
@@ -359,6 +417,19 @@
 
     // TODO: intervalas tarp eilučių – 1,15 kiekvienai antraštei
 
+    // Priedas: kiekvienas pradedamas naujame lape, dešiniajame viršutiniame
+    // kampe rašoma "N priedas", pavadinimas (jei yra) – kaip skyriaus pavadinimas
+    if __is-appendix-heading(it) {
+      align(right, block(below: 10pt, text(weight: "regular")[
+        #__appendix-number(it) #__figure-kinds.appendix.supplement
+      ]))
+      let title = __appendix-title(it)
+      if title != none {
+        block(below: 10pt, title)
+      }
+      return
+    }
+
     // Antraštė be nr.
     if it.numbering == none {
       // Centruota lygiuotė by default, but can be overridden by the user
@@ -397,14 +468,8 @@
       }
     }
 
-    // Determine whether the heading has appending metadata attached and adjust its display accordingly
-    let isAppendixHeading = it.body.has("children") and it.body.children.at(0) == metadata("appendix-heading")
-    if isAppendixHeading {
-      block[#counter(heading).display(it.numbering) #it.body]
-    }
-
     // Poskyris ir skyrelis
-    if not isAppendixHeading and it.numbering != none and it.level != 1 {
+    if it.numbering != none and it.level != 1 {
       // abipusė lygiuotė
       set par(justify: true)
 
@@ -446,13 +511,25 @@
 ///   Use them with `figure(kind: "command", ...)`. Keys:
 ///   - `supplement` (required): text after the number in captions, e.g. "1 komanda.".
 ///   - `ref-name`: text used in references, e.g. "(žr. 1 komanda)". Defaults to `supplement`.
+///     Can also be a function `count => string`, called with the number of elements
+///     referenced together, for kinds whose wording depends on it, e.g.
+///     `count => if count == 1 { "komandą" } else { "komandas" }`.
 ///   - `single-name`: full word used when the figure is the only one of its kind
 ///     and is left unnumbered, e.g. "Komanda." and "(žr. komanda)". Defaults to `supplement`.
 ///     Currently only tables and images are left unnumbered when single, so this only matters for kinds added there.
+/// - code (dictionary | none): Code block configuration, or `none` to leave raw blocks unstyled. Keys:
+///   - `font` (str): Monospace font. Defaults to "Hack".
+///   - `spacing` (relative): Word spacing of code text. Defaults to `80%`.
+///   - `fill` (paint): Background of code lines. Defaults to `white`.
+///   - `stroke` (stroke | none): Outline around the code block. Defaults to `0.5pt + black`; `none` removes it.
+///   - `numbers` (bool): Show line numbers. Defaults to `true`.
+///   - `display-name` (bool): Show the language name badge. Defaults to `false`.
+///   - `display-icon` (bool): Show the language icon badge. Defaults to `false`.
 #let ktu-paper(
   font: "Times New Roman",
   figureNumberingPerSection: false,
   figureKinds: (:),
+  code: (:),
   // Not sure about formal conformity of deviating
   // from the defaults of the next options,
   // but some modules may require them
@@ -468,5 +545,5 @@
   __FIG_PER_SECTION.update(figureNumberingPerSection)
   __USER_FIGURE_KINDS.update(__normalize-figure-kinds(figureKinds))
   __UPPERCASE_SECTION_TITLES.update(uppercaseSectionTitles)
-  body
+  __setup-code(code, body)
 }

template/ataskaita.typ

@@ -1,5 +1,5 @@
-#import "../src/lib.typ": (
-  ktu-paper, setup-code,
+#import "@local/ktu-paper:0.5.0": (
+  ktu-paper,
   ktu-table-of-contents, ktu-picture-list, ktu-table-list, ktu-code-list,
   ktu-heading-page-normal,
   ktu-table,
@@ -13,8 +13,17 @@
   figureKinds: (
     veryCustomKind: (supplement: "komanda", ref-name: "komanda"),
   ),
+  // Code blocks, optional, `code: none` disables styling
+  code: (
+    font: "Hack",
+    spacing: 80%,
+    fill: white,
+    stroke: 0.5pt + black,
+    numbers: true,
+    display-name: false,
+    display-icon: false,
+  ),
 )
-#show: setup-code.with()
 
 #show math.equation: it => {
   show regex("\d+\.\d+"): it => {show ".": {","+h(0pt)}

template/main.typ

@@ -1,5 +1,5 @@
-#import "@local/ktu-paper:0.4.1": (
-  ktu-paper, setup-code,
+#import "@local/ktu-paper:0.5.0": (
+  ktu-paper,
   ktu-table-of-contents, ktu-picture-list, ktu-table-list,
   ktu-heading-page-normal,
   ktu-table,
@@ -9,7 +9,6 @@
 #show: ktu-paper.with(
   font: "Times New Roman",
 )
-#show: setup-code.with()
 
 #show math.equation: it => {
     show regex("\d+\.\d+"): it => {show ".": {","+h(0pt)}

template/test.typ

@@ -1,5 +1,5 @@
-#import "@local/ktu-paper:0.4.0": (
-  ktu-paper, setup-code,
+#import "@local/ktu-paper:0.5.0": (
+  ktu-paper,
   ktu-table-of-contents, ktu-picture-list, ktu-table-list,
   ktu-heading-page-normal,
   ktu-table,
@@ -10,7 +10,6 @@
 #show: ktu-paper.with(
   font: "Times New Roman",
 )
-#show: setup-code.with()
 
 #show figure: it => {
   set block(breakable: true)

typst.toml

@@ -1,6 +1,6 @@
 [package]
 name = "ktu-paper"
-version = "0.4.1"
+version = "0.5.0"
 compiler = "0.15.0"
 entrypoint = "src/lib.typ"
 repository = "https://github.com/svetikas/ktu-paper"